01-02 zx6r / 05-08 zzr clean out the garage sale
#1
01-02 zx6r / 05-08 zzr clean out the garage sale
No trades wanted, will accept paypal BUT only from a paypal confirmed address. i will only ship to that address. Money orders/ cashier's checks accepted. if you have any questions please email me at:
I can (would prefer to as well) combine shipping on items to save money and lower the price for you.
tank: few dings/dents you can see them in the picture. does not come with the petcock valve or lid
$50+ shipping
mephis shade windscreen, it is scuffed up, but a good cheap one. i would say it would be best to sand it down and paint it. you may have problems seeing through it if in a full tuck
$20 shipped
air scoop thing, is slightly cracked but it is nothing serious. could put superglue on it to fix the crack, but i never worried about it
$30 shipped
v-cowl, bottom two mounting brackets missing, when it was mounted on my bike i just used one long bolt going though both the fairings and tightened it up that way, no issues running over 150mph
$25 shipped
oem chain guard: has one extra hole drilled in it from when i was running bigger sprocket:
$15 shipped
vortex 530 14 tooth front sprocket, this was mounted and rode less than 10 miles before removing it (went with a 520 conversion)
$20 shipped
have oem front and rear sprockets (15/40) and chain that i cut off, anyone can have that for shipping plus $5 for paypal fees/gas to the post office. they have about 5000 miles on them
front fender with fork guards, in great shape, just removed this when i bought a new body kit:
$50 shipped for fender alone, $70 shipped for fender and fork guards
forks and lower triple, i do not know if the seals are good on these, the person that sold them to me said they were good, i bought them as an extra set when i was stunting but never used them.
$50+ shipping
air intake parts, have both left and right side intake (NOT THE RUBBER TUBES), they both have a hole drilled in them, you could patch it up with duck tape, no big deal there. and i have one of the rubber tubes, can't remember if it's a left or right side tube
$20+ shipping
rear cowl, good shape, few scuffs but nothing major. no work needed on this to use it
$75 shipped
left lower cowl, few cracks, we started to patch it up but i got tired of working on it and quit. needs a bit of work, not too much though
$50+ shipping
right lower cowl, have already patched most of it up, may need a bit more patching and sanding before painting
$50+ shipping
nose, has been patched up and i think it's all been sanded smooth except for the part underneath by the intake
$50+ shipping
lastly, if you buy the nose and both side fairings i have almost a pint of matched red paint that i will give you for free to get it painted back with. this paint was over $70 itself. i would finish up everything but i bought an RC-51 and i don't feel like doing anymore work on these parts. i just need to clear up the space so i can start working on the RC
again, if any questions email me: samtgallagher@yahoo[DOT]com
I can (would prefer to as well) combine shipping on items to save money and lower the price for you.
tank: few dings/dents you can see them in the picture. does not come with the petcock valve or lid
$50+ shipping
mephis shade windscreen, it is scuffed up, but a good cheap one. i would say it would be best to sand it down and paint it. you may have problems seeing through it if in a full tuck
$20 shipped
air scoop thing, is slightly cracked but it is nothing serious. could put superglue on it to fix the crack, but i never worried about it
$30 shipped
v-cowl, bottom two mounting brackets missing, when it was mounted on my bike i just used one long bolt going though both the fairings and tightened it up that way, no issues running over 150mph
$25 shipped
oem chain guard: has one extra hole drilled in it from when i was running bigger sprocket:
$15 shipped
vortex 530 14 tooth front sprocket, this was mounted and rode less than 10 miles before removing it (went with a 520 conversion)
$20 shipped
have oem front and rear sprockets (15/40) and chain that i cut off, anyone can have that for shipping plus $5 for paypal fees/gas to the post office. they have about 5000 miles on them
front fender with fork guards, in great shape, just removed this when i bought a new body kit:
$50 shipped for fender alone, $70 shipped for fender and fork guards
forks and lower triple, i do not know if the seals are good on these, the person that sold them to me said they were good, i bought them as an extra set when i was stunting but never used them.
$50+ shipping
air intake parts, have both left and right side intake (NOT THE RUBBER TUBES), they both have a hole drilled in them, you could patch it up with duck tape, no big deal there. and i have one of the rubber tubes, can't remember if it's a left or right side tube
$20+ shipping
rear cowl, good shape, few scuffs but nothing major. no work needed on this to use it
$75 shipped
left lower cowl, few cracks, we started to patch it up but i got tired of working on it and quit. needs a bit of work, not too much though
$50+ shipping
right lower cowl, have already patched most of it up, may need a bit more patching and sanding before painting
$50+ shipping
nose, has been patched up and i think it's all been sanded smooth except for the part underneath by the intake
$50+ shipping
lastly, if you buy the nose and both side fairings i have almost a pint of matched red paint that i will give you for free to get it painted back with. this paint was over $70 itself. i would finish up everything but i bought an RC-51 and i don't feel like doing anymore work on these parts. i just need to clear up the space so i can start working on the RC
again, if any questions email me: samtgallagher@yahoo[DOT]com
Last edited by selfinfliction; 03-25-2021 at 11:30 PM. Reason: s
Thread
Thread Starter
Forum
Replies
Last Post
vtvette
PRIVATE For Sale / Trade Classifieds
1
09-10-2020 04:19 AM
onel0wcubn
PRIVATE For Sale / Trade Classifieds
0
06-06-2010 12:27 AM