zx636 vs. 03 gsxr

Thread Tools
 
Search this Thread
 
  #1  
Old 07-25-2007 | 02:49 AM
Fletch's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2007
Posts: 9
Default zx636 vs. 03 gsxr

hi everyone,
My boy has a 2003 GSXR 600 that burns my 05 636. He has a oustanding exhuast kit and sprokets to a 750. i would really like to beat his *** with my bike. I was thinking of getting two brothers exuast and a euro spec ecu. I need some help and recomendations on what I should do to my bike. Any ideas and or specific products that would significantly increase my hoursepower on this bike?

Much thanks,
Fletch
 
  #2  
Old 07-25-2007 | 02:55 AM
green636's Avatar
Member
Joined: May 2006
Posts: 36
Default RE: zx636 vs. 03 gsxr

well being that that is a 750 you will need more then exhaust and ecu get sprockets as well if you are going from a dead stop go bigger in the rear you might be able to get him
 
  #3  
Old 07-25-2007 | 02:58 AM
speedjunky636's Avatar
Junior Member
1st Gear Member
Joined: May 2006
Posts: 19
From:
Default RE: zx636 vs. 03 gsxr

nitrous?
 
  #4  
Old 07-25-2007 | 03:52 AM
768 Ryda's Avatar
Senior Member
1st Gear Member
Joined: Jul 2007
Posts: 748
From: Scottsboro,AL
Default RE: zx636 vs. 03 gsxr

gear that 636 -1+2 or 3 in the rear, get your self a pc and get it maped, through your self a exhaust on and k&n filter or bmc filter, and then challenge him to a race
 
  #5  
Old 07-25-2007 | 03:56 AM
speedracer138's Avatar
Senior Member
1st Gear Member
Joined: Mar 2006
Posts: 4,242
From: Keller (DFW), Texas
1st Gear Member
Default RE: zx636 vs. 03 gsxr

Full exhaust, power commander, Ignition module,BMC air filter, Motul Full synthetic oil, & ECU jumper mod. BTW, the ECU Jumper Mod will turn your ECU to a Euro Spec. Go to the DIY section.
 
  #6  
Old 07-25-2007 | 10:50 PM
TheMaverick's Avatar
Senior Member
1st Gear Member
Joined: Aug 2006
Posts: 155
Default RE: zx636 vs. 03 gsxr

Really not trying to be a jerk or anything this is an honest question.... Can a 636 really beat a 750? Especially if the friends 750 has exhaust and sprockets? My limited knowledge on 750s puts them at quite a big torque and HP advantage over our 636s... I love my bike and all but I'm not sure if I could ever take a 750 and probably not without spending more money than the difference would have been if I just bought one lol...

I'd of course love to hear I'm wrong. Knowing my bike could beat a 750 would be amazing so don't get my wrong just honestly didn't think it was possible.

That's all bike of course I'm sure you stick me up against a poor rider on a 750 I could take them but assuming equal riders...

Again sorry wasn't trying to kill the topic or anything just curious.
 
  #7  
Old 07-25-2007 | 11:06 PM
Fletch's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2007
Posts: 9
Default RE: zx636 vs. 03 gsxr

Its a gsxr 600 with 750 sprockets and a upgraded exhuast
 
  #8  
Old 07-25-2007 | 11:41 PM
aszrael1266's Avatar
The Dude
1st Gear Member
Joined: Oct 2006
Posts: 4,538
From: C.A.
Default RE: zx636 vs. 03 gsxr

stock my 04 636 would slowly walk past my friends 05 GSXR600 with a slip-on.. Now that I have -1+2 sprockets and a slip-on if we both get on i just pull away from him.
 
  #9  
Old 07-26-2007 | 12:29 AM
768 Ryda's Avatar
Senior Member
1st Gear Member
Joined: Jul 2007
Posts: 748
From: Scottsboro,AL
Default RE: zx636 vs. 03 gsxr

gearing will help u alot for quicker acceleration, not going to give u any hp but it delivers the power better thru out the rpm range tho
 
  #10  
Old 07-26-2007 | 12:31 AM
768 Ryda's Avatar
Senior Member
1st Gear Member
Joined: Jul 2007
Posts: 748
From: Scottsboro,AL
Default RE: zx636 vs. 03 gsxr

ORIGINAL: Fletch

Its a gsxr 600 with 750 sprockets and a upgraded exhuast
hey man if it's a 600 u don't have anything to worry about unless he's a rickey gadsen or ryan shnitz, ha ha !
 



All times are GMT. The time now is 02:56 PM.