Sprocket Question

Thread Tools
 
Search this Thread
 
  #1  
Old 06-14-2007 | 12:31 AM
superninja600's Avatar
Thread Starter
|
Senior Member
Joined: May 2007
Posts: 115
From:
Default Sprocket Question

I've got the 07 zx6r and its got a powercommander and twobros V.A.L.E, well i've got it to run a 11.43et at 123mph so far.. i just ordered a front sprocket -1 tooth... will that drop my times any?
 
  #2  
Old 06-14-2007 | 12:34 AM
Notstock's Avatar
Super Moderator
Joined: Jun 2005
Posts: 7,044
From: So Cal
Default RE: Sprocket Question

yes but you will be quicker off the line.
 
  #3  
Old 06-14-2007 | 05:04 AM
projectroc's Avatar
Member
1st Gear Member
Joined: Feb 2007
Posts: 89
From:
Default RE: Sprocket Question

I would go -1 in the front and +2 in the rear....I would LOVE to rip on an 07 down the strip a couple times!
 
  #4  
Old 06-14-2007 | 04:21 PM
hoedogg's Avatar
Administrator
1st Gear Member
Joined: Feb 2006
Posts: 17,484
From: bay area cali
Default RE: Sprocket Question

keep us posted on the time after the changes.
ORIGINAL: superninja600

I've got the 07 zx6r and its got a powercommander and twobros V.A.L.E, well i've got it to run a 11.43et at 123mph so far.. i just ordered a front sprocket -1 tooth... will that drop my times any?
 
  #5  
Old 06-14-2007 | 04:48 PM
Notstock's Avatar
Super Moderator
Joined: Jun 2005
Posts: 7,044
From: So Cal
Default RE: Sprocket Question

ORIGINAL: projectroc

I would go -1 in the front and +2 in the rear....I would LOVE to rip on an 07 down the strip a couple times!
If you can Do -1 front and then add the 1 to the rear and so on. Would be great to compare the changes.

I think the +2 in the rear willkill your overal time.How fast are you doing the 1/8 rt now?
 
  #6  
Old 06-15-2007 | 12:48 AM
superninja600's Avatar
Thread Starter
|
Senior Member
Joined: May 2007
Posts: 115
From:
Default RE: Sprocket Question

my 1/8 mile is 7.1071 at 99.23mph.... i was proud i was cutting .50-.523 R/T's
 
  #7  
Old 06-15-2007 | 12:52 AM
superninja600's Avatar
Thread Starter
|
Senior Member
Joined: May 2007
Posts: 115
From:
Default RE: Sprocket Question

http://www.ohiodragracers.com/files/redninja.wmv this is the only vid i have so far... wasnt the best run but gives you an idea
 
  #8  
Old 06-15-2007 | 01:37 AM
mikedrinfla's Avatar
Senior Member
1st Gear Member
Joined: Nov 2006
Posts: 1,456
From: In the BURG
Default RE: Sprocket Question

Not bad bro keep working it.
 
  #9  
Old 06-15-2007 | 06:48 AM
projectroc's Avatar
Member
1st Gear Member
Joined: Feb 2007
Posts: 89
From:
Default RE: Sprocket Question

ORIGINAL: Notstock

ORIGINAL: projectroc

I would go -1 in the front and +2 in the rear....I would LOVE to rip on an 07 down the strip a couple times!
If you can Do -1 front and then add the 1 to the rear and so on. Would be great to compare the changes.

I think the +2 in the rear willkill your overal time.How fast are you doing the 1/8 rt now?
I thought going +2 would be overkill also...but it wasn't - I gained 3 tenths and 2.5mphby going 2 up and a different slip-on.

Nice reaction times! Doesn't effect overall time but none the less...good job
 
  #10  
Old 06-15-2007 | 08:55 AM
superninja600's Avatar
Thread Starter
|
Senior Member
Joined: May 2007
Posts: 115
From:
Default RE: Sprocket Question

I know the reaction times dont effect timeslips but its bracket racing so the races are prettymuch won and loss at the starting line... i've raced cars for the past 4 years this is my first bike.... looking to get a zx10 or something bigger! pathetic when my cars are faster than my bike
 


Quick Reply: Sprocket Question



All times are GMT. The time now is 01:41 PM.