JUST OUT OF CURIOSITY AIRMANALLEN, HOW DOES AND WHAT DOES THAT PLATE MOUNT BOLT TO ?

 

[quote] evil636

JUST OUT OF CURIOSITY AIRMANALLEN, HOW DOES AND WHAT DOES THAT PLATE MOUNT BOLT TO ? [quote]

There are two bolts already sticking out of the bottom of the undertail. The kit includes two longer bolts that the bracket attatches to. You have to drill three small holes in the plastic to route the turn signals and plate light. You also have to cut the factory plugs off each light and splice them into the new lights. It's very easy and the instructions are farily detailed.

 

ooops didn't mean to quote myself

 

thanks, i was wondering because i did the same thing. got about 3.00 into my plate mount.

 

heres a pic.

 

looks good. i used the two brothers tag plate and bent it to make it work so i could retain turns. mounted it to the rear peg brackets. love the looks of the exhaust airman.

 

got any pics showing exactly what you used or how you did it?

and what are you doing for turn signals/license plate light?

 

Where can I get a bracket that tucks up under the tail like that? That looks really good.

 

the lic plate lights consist of two "light in bolts" mainly used on hot rods. they bolt into the two top plate holes. there really is no complicated way to describe a plate mount. the stock bolts coming out of the bottom of the bike were replaced with longer ones, i took my piece of metal, cut it, roll bent it and shaped it up a little, cut some holes in the back with a hole saw and a drill press, drilled my mounting holes and bolted it up. ill get some pics of the lights mounted up as soon as they come in.

 

i forgot, i have the ca intergrated rear turn signal installed.