got into an accident..questions.

Thread Tools
 
Search this Thread
 
  #1  
Old 10-06-2007 | 11:02 PM
nin.zx.6r's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Sep 2007
Posts: 37
Default got into an accident..questions.

hey guys. i just got my bike a few weeks ago and i got into an accident already. i was in the backroads taking some corners and i took one too fast and wiped out. the whole right side of my bike is f***ed up. frame is all scratched to hell, my right riew view mirror broke off..pretty much its jacked up. i'll try and post pictures tomorrow. but my question is...do bike shops repair these kinds of damages? and what am i looking to pay? to my knowledge, there are no mechanical damges...i just rode it back home. the right side is all scractched up and theres a small dent on my gas tank...Oh and my right frame sliders fell off and couldnt find it...any help would be appreciated. thanks!
 
  #2  
Old 10-06-2007 | 11:11 PM
Dragone#19's Avatar
Administrator
Joined: Nov 2005
Posts: 18,288
From: The Silver State
1st Gear Member
Default RE: got into an accident..questions.

ouch, glad that you are ok. Do the repairs yourself and save some $'s.
 
  #3  
Old 10-06-2007 | 11:33 PM
Ybslow's Avatar
Senior Member
1st Gear Member
Joined: Jul 2007
Posts: 113
From:
Default RE: got into an accident..questions.

glad you're ok. Good luck with the repairs.
 
  #4  
Old 10-07-2007 | 12:41 AM
Odimus's Avatar
Senior Member
Joined: Mar 2006
Posts: 3,056
From: Maine
1st Gear Member
Default RE: got into an accident..questions.

save yourself 60-70 per hour by doing it yourself...
 
  #5  
Old 10-07-2007 | 12:44 AM
zzrick's Avatar
Senior Member
1st Gear Member
Joined: Jun 2007
Posts: 8,820
From: Liberty Twnshp, OH
Default RE: got into an accident..questions.

+1
 
  #6  
Old 10-07-2007 | 02:15 AM
sup_uni's Avatar
Senior Member
1st Gear Member
Joined: Jul 2006
Posts: 1,397
From: Yellowstone Country = mountains
Default RE: got into an accident..questions.

do it yourself, not hard at all. as for the dent in the tank take that to a shop maybe 150 max.

since the frame slider faild, talk to the company you got them from sometimes you can get those replaced becasue they want to do r and d on the failed unit

glad to hear you are ok
 
  #7  
Old 10-07-2007 | 05:36 AM
nin.zx.6r's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Sep 2007
Posts: 37
Default RE: got into an accident..questions.

thanks guys. i dont know how to take off the plastic parts off the frame. do i just unscrew pretty much? i still wanna take it to a shop and get it checked out for any other damages i can't see..ugh this sucks lol. am i lookin to pay over a grand for all the repairs at a shop? or more? less?
 
  #8  
Old 10-07-2007 | 08:42 AM
Dragone#19's Avatar
Administrator
Joined: Nov 2005
Posts: 18,288
From: The Silver State
1st Gear Member
Default RE: got into an accident..questions.

A little common sense and mechanical aptitude goes along way. A manual, a few screws, a couple of plastic quick rivets and a beer and you are all done. Beats the $70/hr or so price tag of a dealer telling or doing the same thing.
 
  #9  
Old 10-07-2007 | 08:57 AM
rocketrotary's Avatar
Senior Member
1st Gear Member
Joined: Apr 2007
Posts: 8,268
From: Ft. Gordon (Augusta) GA
Default RE: got into an accident..questions.

+1... If you take it to a shop, you are going to get ripped off. Did it ride alright on your way back home? As long as the ride was good, and their wasn't any difference in how it ran or handled, you'll be find. Just buy a new gas tank, and some aftermarket body work, a new mirror, and get in touch with the manufacturer of the frame sliders so you can get them to replace it. You'll save a lot of money, and feel better doing it. Glad to hear you are okay. It sucks about your bike, but it's a lot easier to replace body parts on your bike than it is to replace parts of your body.
 
  #10  
Old 10-07-2007 | 03:58 PM
nin.zx.6r's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Sep 2007
Posts: 37
Default RE: got into an accident..questions.

alright i'll def try diong it myself. anyone know a good site where i can get oem parts ?
 



All times are GMT. The time now is 11:07 PM.