front signal holes
#11
RE: front signal holes
Here's a pic of the signals. I got them on ebay. They are Carbon Fiber "Look" flushmount LED's.
[IMG]local://upfiles/1485/23F34E0D63514BD6AC001FAE4F57DE15.jpg[/IMG]
[IMG]local://upfiles/1485/AEE8633B59514474887F3701EFC78EA4.jpg[/IMG]
[IMG]local://upfiles/1485/23F34E0D63514BD6AC001FAE4F57DE15.jpg[/IMG]
[IMG]local://upfiles/1485/AEE8633B59514474887F3701EFC78EA4.jpg[/IMG]
#13
RE: front signal holes
I made my own adapter plates with 1/16" ABS plastic sheet. I scored the pattern with a scribe from the back of the Turn Signal hole in the fairing and used a pair of tin snips to cut them just a little bigger that the hole. Then I pushed them in so they fit in tight. I then put on the turn signals using 3M double backed foam tape. The tape keeps the blocking plates and the turn signals in place. They haven't move for over 3K miles and look like they were made for the bike.
[IMG]local://upfiles/1485/DDA534917E5F461D99677BD581A83329.jpg[/IMG]
[IMG]local://upfiles/1485/DDA534917E5F461D99677BD581A83329.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post