you can do some ish like that if you want to keep the light. it was clean for 3 days untill i desided to tqake it off and put the plate under the rear section.

 

O, you just gave me an idea. Thanks Evil.

 

right on, that one worked out allright.

 

 

one more, this was the very next day i had my bike.

 

I finished my tag/taglight bracket today. The weather was too crappy for pics. I have a wagon full of the progression of making it, but I want to get some of the complete project. I'll try to get the pics. tomorrow.

 

Here's what I did on an 06:

[IMG]local://upfiles/1485/04B35D1C0EC94977B4D0116A68D7312D.jpg[/IMG]

 

photo bucket
Ok, I finally got around to posting some photos. I'm sorry some of the pics got mixed up in the upload. I also took a couple of the plastic that the turn signals are mounted on that I cut. I put some auto door guard on the edges to clean them up, and make the lines consistent. On the tag mount I used 1/8" X 1 1/2 X 1 1/2 aluminum L channel, 1/4" x 3" bar stock aluminum, a piece of aluminum fuel line that I had. and a pair of light-up tag bolts. Everything was made using a rotary tool, and a hammer, and my trusty cordless drill. I did receive a lot of encouragement from "Sexy Pants von Sexinstiene" my GF who is also in a pic. So far I really like it. The only thing I would have done differently is to cut the L channel twards the front at an angle, so it wouldn't be so "square".

 

Hey jay that looks much better you are going to have to bring it up to quaker steak next week so I can see it in person. The can looks alot better painted black. Way to go!!!!!!!!!!