Exposed tag light wire.
#1
Exposed tag light wire.
I just installed a Clear Alternatives rear integrated turn signal. Well, I notices that the tag light wire is exposed. Dose any one have any suggestions on how to hide the wire. It's bugging me. The way it's just all exposed... It's messing with the cleaned-up lines.
#2
RE: Exposed tag light wire.
Prolly not too helpful with this, but on my 10r, I was able to electrical tape the molex to keep it clean and just keep the connector inside of the rear left fairing of the tail section.
#6
RE: Exposed tag light wire.
Bring it by and we can see about hiding it.
#7
RE: Exposed tag light wire.
Cool man I will be there. I will probably be there around 7. If you bring your bike I will most definently take a look at the wire for you and see where we can hide it. I will be the tall guy most likely in all black. see you then.
#9
RE: Exposed tag light wire.
Evil, you kick too much ***. I don't think the law dogs have the stones to pull you over. I met up with Mike, and he had some good ideas (thanks Mike). I'm gonna take-off my factory exhaust clean it up, and paint black it with some VHT, or Plasti-coat high temp paint, get a piece of 1/4" aluminum tube, and put the wire through it. I am also gonna make a bracket to mount the tag with some aluminum sheet, and a piece of L channel I have laying around. I will take a bunch of before, and after pics for y'all.
#10
RE: Exposed tag light wire.
Hey J I am glad I could help out I do want to see it when you get it done maybe naxt Wednesday you and the old lady can come up to Quaker Steak. I hope it works out for you If you need any other Ideas drop me line. I will try to get you a price on those Vortex rear sets from JR this weekend. Just to give you an idea how much they are going to cost.
[IMG]local://upfiles/3581/F1F162685621455482310C26DBEAA4AB.jpg[/IMG]
[IMG]local://upfiles/3581/F1F162685621455482310C26DBEAA4AB.jpg[/IMG]