Custom mapped my PCIII
#1
Custom mapped my PCIII
Here is the Dyno sheet of my bike after I had it remapped custom. This is why you should have your bike Dyno'd and map out to your ap. Look at the air fuel mixture from 4000 to about 8000 rpm. Pretty nasty. Hope this helps anyone out who is debating on getting a costum map or not.
[IMG]local://upfiles/3581/2FDD7EC3AD484DD28D6923E30A66D263.jpg[/IMG]
[IMG]local://upfiles/3581/2FDD7EC3AD484DD28D6923E30A66D263.jpg[/IMG]
#3
RE: Custom mapped my PCIII
Mike, did you do the ECU jumper mod?
Here's my initial dyno run with stock & a generic map.
[IMG]local://upfiles/1485/E79C4B9600DC403C851FFF8FCB9D5470.jpg[/IMG]
Here's my initial dyno run with stock & a generic map.
[IMG]local://upfiles/1485/E79C4B9600DC403C851FFF8FCB9D5470.jpg[/IMG]
#7
RE: Custom mapped my PCIII
My bike is an 03 (03-04's don't have this option)so I cannot do the mod to mine until I swap in the 05 motor. You may want to get it dyno'd again after you do the jumper mod. The guy who did your dyno will probably redo it for you cheap. This way you can see the actual gain in horsepower.
#8
RE: Custom mapped my PCIII
Actually I might be able to get it done for free. I have been sales pitching for them as you noticed in my signature. Plus I hang out with him. At bike night I park at their vendor location and help out with peoples questions.