Charging System????
#11
RE: Charging System????
Charging system should be checked above 3,000 RPM and should be around 13 volts or more in normal configuration. Theck you battery terminal connection for contactand tightenss. Clean them with a wire brush and re-install. Spray it with anti corrosion battery post spray.
#12
RE: Charging System????
I know I am supposed to have between 14.2 and 15.2 when the bike is off idle. I do see a light change, about .2-.3 volts when off idle. I checked the diodes and they seem to be okay. I haven't checked the regulator circuit. I talked to my buddy back in WA who's a Kawi tech and he said it is most likely the rectifier/regulator that is bad. I just wanted to see if anyone has had this problem. I don't want to buy the part and the problem be somewhere else.
#16
RE: Charging System????
ok so would doing the dual light mood kill the bat or the regulator on the bike?????and if so how do i fix it. any of it do i replace the regulator or what do i do i dont htink it is the bat becuase i charged it and it turned over fine for a while then the bike jsut died
Thread
Thread Starter
Forum
Replies
Last Post