changing left clip on
#1
changing left clip on
05 ZX6r
I am confused... Do i have to remove the triple tree in order to change the left side clip on? Let me know what to do...
or at the very least- the clutch lever. . .
Thanks!
-Rains
I am confused... Do i have to remove the triple tree in order to change the left side clip on? Let me know what to do...
or at the very least- the clutch lever. . .
Thanks!
-Rains
#3
RE: changing left clip on
yes you have to remove the top tree, unless you drop a leg like drag mentioned.
experienced = drop a leg
beginer = take the top tree off so you can see what goes where before you rip it all off.
experienced = drop a leg
beginer = take the top tree off so you can see what goes where before you rip it all off.
#5
RE: changing left clip on
92150 is bolted into the top of the tree. remove that and the pinch bolt 92153 and your controls should be self explanitory. should take you no longer than 20 minutes to remove the old and replacewith new.
#6
RE: changing left clip on
this is where dropping the leg comes in, you drop the leg, loosen the controls (220) move the clip on towards the center of the bike and slide the switches off the clip on.
#9
RE: changing left clip on
Right on, the 10r is still at the shop. They still have not degreed the cams yet, head gasket, etc. hmm, thinking that I should have done it, then let them play with dyno'ing. No street riding lately, and great weather.
#10
RE: changing left clip on
same here. does muzzys still do motor work ? i know back in the day i had to ship them my motor and they rubbed and tickled it then sent it back for me to bolt in and go. i miss my old fast *** dinosaur zx7