06 636 exhaust help!!

Thread Tools
 
Search this Thread
 
  #11  
Old 02-23-2006, 07:33 PM
importmonkey's Avatar
Member
Join Date: Nov 2005
Location:
Posts: 74
Default RE: 06 636 exhaust help!!

you should not need a power commander with only a slip on. yes, it may lean out your bike a bit, but not enough to cause problems. however, it will only help to get a pc. and, if you ever get a k&n or a full exhaust, you'll need a pc.
 
  #12  
Old 02-24-2006, 05:14 AM
greenteam's Avatar
Member
Join Date: Jul 2005
Location:
Posts: 77
Default RE: 06 636 exhaust help!!

I don't get it.

Everyone wants to put on a full exhaust or slip-on and even an K&N filter but nobody ever goes the whole 9 yards to correct the air fuel ratio.

I can't believe a shop would tell you that a PCIII is not needed when you add a slip-on. Humm, I guess eliminating the exhaust valve won't cause leaness LOL.

I guess you guys aren't into getting the most power out of your bikes.

Mike



 
  #13  
Old 02-24-2006, 05:45 AM
Join Date: Feb 2006
Location:
Posts: 60
Default RE: 06 636 exhaust help!!

Slip ons do not eliminate the exhaust valve and do not require pc or jetting if you have carbs.

Slip on and air filter yes.

Full system yes.

If you go full system though the gains are all on the top end and you lose bottom and mid range power. That is what the exhaust valve compensates for. It keeps the compression up so you still have lots of low and mid.

With out the exhaust valve you may take steps to improve the low mid by changing your gearing. I have -1 and +2 it diffidently fixes the low and mid power loss.


 
  #14  
Old 02-24-2006, 06:08 AM
056r's Avatar
Senior Member
1st Gear Member
Join Date: Oct 2005
Location:
Posts: 1,068
Default RE: 06 636 exhaust help!!

not sure if this is true for other bikes but my 2bros on my 6r did remove the exhaust valve.
 
  #15  
Old 02-24-2006, 06:10 AM
gotrice's Avatar
Senior Member
Join Date: Jun 2005
Location:
Posts: 2,098
Default RE: 06 636 exhaust help!!

good call, now that i think about it all 636's that need that FI fix need it cause of that butterfly valve being removed. hmmmm
 
  #16  
Old 02-24-2006, 06:15 AM
Join Date: Feb 2006
Location:
Posts: 60
Default RE: 06 636 exhaust help!!


ORIGINAL: 056r

not sure if this is true for other bikes but my 2bros on my 6r did remove the exhaust valve.
I am no expert with the 636 or 2bros but normally a slip on is just that, remove stock can and slip on new can. Maybe you got full system.
My exhaust valve was at the end of the header just after all the pipes formed into 1 single pipe. After tthat was a mid pipe and then the can.
I had a slip on before I whent to the full system.
 
  #17  
Old 02-24-2006, 06:18 AM
gotrice's Avatar
Senior Member
Join Date: Jun 2005
Location:
Posts: 2,098
Default RE: 06 636 exhaust help!!

the valve for the 05/06 636 is actually on a small section of pipe welded to the can. so if stock can comes off, it comes off
 
  #18  
Old 02-24-2006, 06:36 AM
Join Date: Feb 2006
Location:
Posts: 60
Default RE: 06 636 exhaust help!!

I was checking out the microfiche for the 05 / 636 and I see what you are saying.

056r raises a good point. Guess you would have to consult the pipe manufacture.
Would not trust the dealer to give you a real answer.

Thanks Gotrice
 
  #19  
Old 02-24-2006, 06:39 AM
evil636's Avatar
Knee Dragging Pimp
1st Gear Member
Join Date: Jan 2006
Location: mufukin Long Beach.
Posts: 11,885
Default RE: 06 636 exhaust help!!

yes the valve comes off with the stock muffler, but the servo that works the valve stays and functions, thats why two bros as well as muzzy sell the servo stop to keep the fi light from coming on.


and if anyone has a fi light on and dont have the servo stop, muzzy sells it for 29 bucks and two bros sells it for 99 bucks. its the same freakin thing, i have compared the two side by side.
 
  #20  
Old 02-25-2006, 08:42 AM
md636's Avatar
Junior Member
Thread Starter
Join Date: Feb 2006
Posts: 4
Default RE: 06 636 exhaust help!!

thanks all!! this is one sweet az site. i'm going to order a titanium yosh from More Power Racing and i'll post an update on it.

by the way, does anyone have experience the More Power Racing? the price seems almost too good to be true.

merdox, i got the black color. a little high maintenance but loving it.

evil636, that muzzy looks real sharp. keep them pictures coming.

thanks again!
 


Quick Reply: 06 636 exhaust help!!



All times are GMT. The time now is 04:05 AM.