05 636 hp???

Thread Tools
 
Search this Thread
 
  #1  
Old 07-25-2007 | 01:59 AM
green636's Avatar
Thread Starter
|
Member
Joined: May 2006
Posts: 36
Default 05 636 hp???

has anyone dyno'd there bikes stock what numbers you get i have been hearin with full exhaust and tunning they have been turning out any where from 120 to 126
Also my friend has a 07 gxs-r 600 we do highway runs when his bike was stock i beat him by 3 cars or so but he says all he did was add a slip-on and now he beats me like im not even tryin to race anyone else run into this problem my bike is stock + knn filter
 
  #2  
Old 07-25-2007 | 02:49 AM
speedracer138's Avatar
Senior Member
1st Gear Member
Joined: Mar 2006
Posts: 4,242
From: Keller (DFW), Texas
1st Gear Member
Default RE: 05 636 hp???

Do the ECU jumper mod and you should be able to keep up. If not, get a slip-on. Each bikes HP will be different even if the bikes are identical.
 
  #3  
Old 07-25-2007 | 04:06 PM
aszrael1266's Avatar
The Dude
1st Gear Member
Joined: Oct 2006
Posts: 4,538
From: C.A.
Default RE: 05 636 hp???

Like speed said no two bikes are the same. Some people get whats a lot call factory freaks and some get slower then normal bikes. From what I hear when bike mags get bikes to test the factorys dyno a crap load of bikes to see what one makes the most power and that is the one that gets sent out.
 
  #4  
Old 07-25-2007 | 07:08 PM
SERGE's Avatar
Member
Joined: Feb 2006
Posts: 88
Default RE: 05 636 hp???

For reference (and knowing somewill jump on me for answering) I've heard of a couple people getting up toaround 116 RWHP with a slip-on and K&N; me being one of them.

It ran to lean and the humidity and temperature may have help (cold and low humidity), so take 6 and say they should run about 110.

Cheers.
 
  #5  
Old 07-25-2007 | 07:55 PM
aszrael1266's Avatar
The Dude
1st Gear Member
Joined: Oct 2006
Posts: 4,538
From: C.A.
Default RE: 05 636 hp???

I got 118 with just a slipon. I thought it was some fluke or something but 3 pulls were all pretty much the same and 2 other stock bikes dynoed on the same dyno same day all got numbers spot on where they should be. You never can tell with bikes. Some may have really strong motors while others dont'
 
  #6  
Old 07-25-2007 | 11:21 PM
768 Ryda's Avatar
Senior Member
1st Gear Member
Joined: Jul 2007
Posts: 748
From: Scottsboro,AL
Default RE: 05 636 hp???

ORIGINAL: aszrael1266

I got 118 with just a slipon. I thought it was some fluke or something but 3 pulls were all pretty much the same and 2 other stock bikes dynoed on the same dyno same day all got numbers spot on where they should be. You never can tell with bikes. Some may have really strong motors while others dont'
thats some good no#'s man, and also that sounds just about right, i agree with some guy's sayin no 2 bikes are the same and all dynoes are going to read different from my experience, i am fixin to take my 04 to the dyno again, with a new custom map, lookin to get 120 ish out of it once tuned
 
  #7  
Old 07-26-2007 | 01:17 AM
superninja600's Avatar
Senior Member
Joined: May 2007
Posts: 115
From:
Default RE: 05 636 hp???

i got 146hp with my 07 zx6r...
 
  #8  
Old 07-26-2007 | 01:22 AM
768 Ryda's Avatar
Senior Member
1st Gear Member
Joined: Jul 2007
Posts: 748
From: Scottsboro,AL
Default RE: 05 636 hp???

ORIGINAL: superninja600

i got 146hp with my 07 zx6r...
woo what mods u got done to it, and is that at the crank or at the wheel
 
  #9  
Old 07-26-2007 | 02:58 AM
green636's Avatar
Thread Starter
|
Member
Joined: May 2006
Posts: 36
Default RE: 05 636 hp???

wow 146 is nuts you must have alot of work done to that. i know of a kit it is around 5k and will put down 136 to the wheel so 146 must have cost alot unles you got nos...
 
  #10  
Old 07-26-2007 | 04:12 AM
Dragone#19's Avatar
Administrator
Joined: Nov 2005
Posts: 18,288
From: The Silver State
1st Gear Member
Default RE: 05 636 hp???

wow is right! Crap my 10r stock at 5400 feet with a 90 degree ambient makes 146.
 


Quick Reply: 05 636 hp???



All times are GMT. The time now is 07:19 AM.