View Poll Results: A poll
Follow the Factory
28.57%
Ride It Like You Stole It!
28.57%
Heat Cycles
42.86%
Other
0
0%
Voters: 7. You may not vote on this poll

Best method to break in a '07 ZX10R?

Thread Tools
 
Search this Thread
 
  #11  
Old 02-28-2007 | 09:51 AM
lemac's Avatar
Senior Member
1st Gear Member
Joined: Nov 2005
Posts: 3,157
Default RE: Best method to break in a '07 ZX10R?

I poor metal shavings in my oil and ride around town for a couple of hours.... within factory spec break in and cut my break in period down by atleast 90%. Went back to the shop and put clean oil back in her... runs like a champ....

Warnning this procedure should only be done by a pro. please do not try this on your own and if you believed the above story then I did not waste my time writting it... lol

J/k bro I did the factory spec
 
  #12  
Old 03-02-2007 | 05:46 AM
Grease's Avatar
Thread Starter
|
Junior Member
Joined: Feb 2006
Posts: 20
From:
Default RE: Best method to break in a '07 ZX10R?

Now that was the best method yet!
 
  #13  
Old 03-19-2007 | 10:40 PM
BlueZX10R's Avatar
Junior Member
Joined: Mar 2007
Posts: 7
Default RE: Best method to break in a '07 ZX10R?

i follow like my other bikes... i just bought a new 07 zx 10r but i roll the throttle everywhere and i never go past 6500 for the first 600miles... then after that i let hell break loose
 
  #14  
Old 03-20-2007 | 06:31 AM
Live2Ride's Avatar
Senior Member
Joined: May 2006
Posts: 102
From:
Default RE: Best method to break in a '07 ZX10R?

***** to the wall and don't look back.
 
  #15  
Old 04-24-2007 | 12:00 PM
BVOYTEKB's Avatar
Junior Member
Joined: Apr 2007
Posts: 8
Default RE: Best method to break in a '07 ZX10R?

2nd gear, redline it twice for couple secondsand your good to go.
05 zx10
 
  #16  
Old 09-12-2007 | 07:22 PM
ElNinja10R's Avatar
Member
Joined: Sep 2007
Posts: 49
From:
Default RE: Best method to break in a '07 ZX10R?

Factory specs + 1K to 2K rpms. Got about 3K on her now and she's running great!
 
  #17  
Old 10-12-2007 | 02:17 AM
GETTIN SQUIRLLY's Avatar
Junior Member
Joined: Oct 2007
Posts: 9
Default RE: Best method to break in a '07 ZX10R?

I have an 07 zx10 and when I down shift I go to crack the throttle and the motor bogs down always on the first downshift. It does not happen on the rest of the way down through the gears. My bike only has 592 mi. on it. Anyone experienced this???????????
 
  #18  
Old 10-12-2007 | 11:52 AM
rocketrotary's Avatar
Senior Member
1st Gear Member
Joined: Apr 2007
Posts: 8,268
From: Ft. Gordon (Augusta) GA
Default RE: Best method to break in a '07 ZX10R?

[sm=rant.gif]
ORIGINAL: Rocketrotary
You don't want to redline it but bringing the r's half way up to redline is not a problem, no more than that for at least 1000 miles, on the flip side it is just as bad to lug the motor. Shift often, vary speed, minimum idle, don't overheat in slow traffic, Vary rpm's within range and warm up at idle for4-5 minutes minimum for first startup of the day. Cool motor will inherit leaks. Usually after first oil change you can ride it like you stole it!!!!!
[/quote]
 
  #19  
Old 10-14-2007 | 01:47 PM
yves_0016's Avatar
Junior Member
Joined: Sep 2007
Posts: 10
Default RE: Best method to break in a '07 ZX10R?

DO NOT FOLLOW FACTORY GUIDELINES!! Will cost you up to 15 hp on the rear wheel...

* 1st 80 to 100 miles: ride her cleanly, but bravely. Use the clutch to go up in the gears and take her close to redline a couple of times, generally change gears at 6 to 9 K. DO NOT RIDE THE FIRST 100 MILES ON A MOTORWAY...
* At 100 miles: 1st oil change
* Next 100 miles: Ride her fast. Go to redline more frequently and start upshifting without the clutch.
* At 200 miles: second oil change.
* After that: ride it like you stole it.

I only use CASTROL R4 SUPERBIKE oil.

All engines have been tested en taken up to redline in the factory. Especially litre bikes: you won't hurt her and you'll have a far better bike afterwards!



 
  #20  
Old 01-15-2008 | 12:30 AM
kx slaughter king's Avatar
Senior Member
1st Gear Member
Joined: Aug 2007
Posts: 4,932
From: derry nh
Default RE: Best method to break in a '07 ZX10R?

i just beat the p!ss out of itfrom day one. and when it starts running junky, i throw on new tires and plastics and it meets craigslist. where it sells for way to much to some sucker that thinks looks are everything
horay for saps!!!
 



All times are GMT. The time now is 10:29 AM.