What's your odometer reading?
#21
01-17-2008 | 12:48 PM
Senior Member
1st Gear Member
Joined: Jun 2007
Posts: 3,337
From: DC
RE: What's your odometer reading?
actually what i meant was that your bike looks like the ninja 650 of here
but the ones i saw in europe, (i was in croatia) last summer, looked like this
as far as the shocks go, i have no idea.
but the ones i saw in europe, (i was in croatia) last summer, looked like this
as far as the shocks go, i have no idea.
#22
01-17-2008 | 04:27 PM
Junior Member
Joined: Jan 2008
Posts: 13
From: kent England
RE: What's your odometer reading?
The ER6F is the faired version, the ER6N is the naked version only difference is the clocks and the wheight plus the missing fairings, can you not get the n model over there?
#25
01-17-2008 | 07:59 PM
Senior Member
Joined: Jan 2008
Posts: 175
From:
RE: What's your odometer reading?
welcome to KF! i got a 07 650 and i love it! it is my first bike to. i followed the break-in guidelines and i havent had any problems with it, its got 2,229 miles on it. i also have the buzz in the fairing, i tried tighting up the screws and it helped 4 a lil bit but ive gotton used to it now, i just make sure there tight. like jperskins812 said the bike is happy around 6000 8000 rpms. hope u enjoy it and Watch out 4 Everybody Else!
#26
01-18-2008 | 11:47 AM
Junior Member
Joined: Jan 2008
Posts: 13
From: kent England
RE: What's your odometer reading?
I don;t know how much it would cost but it must be possible to change the fairings and convert it to a naked girl (oops , model)
My next bike is going to be a ZZR1400 but thats years off, still have to pay for this one.
My next bike is going to be a ZZR1400 but thats years off, still have to pay for this one.
#27
01-18-2008 | 11:56 AM
Junior Member
Joined: Jan 2008
Posts: 13
From: kent England
RE: What's your odometer reading?
Hi nc
thanks for the welcome, don;t put up with the vibration, its easy to cure, take off the two inner panels either side of the head and tank, turn them over and you will see the lcating lugs three i think, get some double sided sticky tape thicker the better and put a piece on each lug and refit them. there is a kit available under warranty but i could not be bothered to take the bike in to have it fitted
I wanted an orange ER6F but they did not do that colour, red would hve been my second choice but they only do the black and blue over here, did not like the blue.
Tony
thanks for the welcome, don;t put up with the vibration, its easy to cure, take off the two inner panels either side of the head and tank, turn them over and you will see the lcating lugs three i think, get some double sided sticky tape thicker the better and put a piece on each lug and refit them. there is a kit available under warranty but i could not be bothered to take the bike in to have it fitted
I wanted an orange ER6F but they did not do that colour, red would hve been my second choice but they only do the black and blue over here, did not like the blue.
Tony
#29
01-18-2008 | 10:19 PM
Senior Member
Joined: Jan 2008
Posts: 175
From:
RE: What's your odometer reading?
ORIGINAL: TonyER6F
Hi nc
thanks for the welcome, don;t put up with the vibration, its easy to cure, take off the two inner panels either side of the head and tank, turn them over and you will see the lcating lugs three i think, get some double sided sticky tape thicker the better and put a piece on each lug and refit them. there is a kit available under warranty but i could not be bothered to take the bike in to have it fitted
I wanted an orange ER6F but they did not do that colour, red would hve been my second choice but they only do the black and blue over here, did not like the blue.
Tony
Hi nc
thanks for the welcome, don;t put up with the vibration, its easy to cure, take off the two inner panels either side of the head and tank, turn them over and you will see the lcating lugs three i think, get some double sided sticky tape thicker the better and put a piece on each lug and refit them. there is a kit available under warranty but i could not be bothered to take the bike in to have it fitted
I wanted an orange ER6F but they did not do that colour, red would hve been my second choice but they only do the black and blue over here, did not like the blue.
Tony
Thread
Thread Starter
Forum
Replies
Last Post
cjcrashesalot
KLX 250S
11
07-10-2009 08:48 PM
