Aftermarket Parts
#1
Aftermarket Parts
Hello my name is Chirs and I'm new to this bike forum. I never joined one and I was hoping someone can assist me with a couple of newbie questions. I just purchased a new 2007 250. I live here in San diego and I would like to know if anyone can help me with
1) Fender eliminator Kit, installation and where I can bring it for installation?
2) I would like to take out the turn signals and put flush mounted ones.
3) I would like to take out the mirrors and put the handle bar ones. I don't know where I can purchase a cover to put over holes when I take out the mirrors?
PLEASE HELP!
Thank you!
1) Fender eliminator Kit, installation and where I can bring it for installation?
2) I would like to take out the turn signals and put flush mounted ones.
3) I would like to take out the mirrors and put the handle bar ones. I don't know where I can purchase a cover to put over holes when I take out the mirrors?
PLEASE HELP!
Thank you!
#2
RE: Aftermarket Parts
Welcome to the forums, Chris. I'm not sure how much of a "do it yourself" type of guy you are, but if you don't mind getting your hands a little dirty, my suggestions should help you out here.
To answer your questions in order the best I can,
Questions 1 and 2 can be answered best by reading my original 250R makeover project post. I have pictures, links, as well as other members input that will help you out in this post.
Question 3) I would think handle bar mounted mirrors would be somewhat universal, but don't know about any block off plates to hide the factory mount holes. I replaced my OEM 250R mirrors with Yamaha R1/R6 mirrors last year. This is a part of my R1 mirror project post. They are fairly easy to install, and look WAY better than the originals. (At one point I gave up in frustration, but I found a better way to mount them later.)
Hope this helps out a little.[8D]
To answer your questions in order the best I can,
Questions 1 and 2 can be answered best by reading my original 250R makeover project post. I have pictures, links, as well as other members input that will help you out in this post.
Question 3) I would think handle bar mounted mirrors would be somewhat universal, but don't know about any block off plates to hide the factory mount holes. I replaced my OEM 250R mirrors with Yamaha R1/R6 mirrors last year. This is a part of my R1 mirror project post. They are fairly easy to install, and look WAY better than the originals. (At one point I gave up in frustration, but I found a better way to mount them later.)
Hope this helps out a little.[8D]
Thread
Thread Starter
Forum
Replies
Last Post
Rowdg03
Ninja 650R
10
10-31-2006 11:33 PM