What’s your year and mileage and location?

Thread Tools
 
Search this Thread
 
  #31  
Old 07-13-2009 | 02:45 AM
arizona gamebird's Avatar
Junior Member
1st Gear Member
Joined: Jul 2008
Posts: 29
Default

rockrash42 i have not checked the valves yet (nock on wood) still fires up, no loss of what power there is, but i still have that darn cam chain tick going on. added 226 miles on it today watch for a ride report.
 
  #32  
Old 07-13-2009 | 02:55 AM
mudjunkie's Avatar
Senior Member
1st Gear Member
Joined: May 2007
Posts: 878
From: New Glasgow, Nova Scotia, Canada
Default

I live in Nova Scotia, Canada and My mileage is 9600KMs...almost 6000 miles...I will probably check the valves this winter..will need new brakes by then too...I have tio order new chain and sprockets now though.
 
  #33  
Old 07-13-2009 | 03:37 AM
marble 1's Avatar
Junior Member
Joined: Jul 2009
Posts: 4
From: western ct.
Default

07 klx 250s 3700 well run miles
 
  #34  
Old 07-13-2009 | 05:18 AM
cliffsta's Avatar
Senior Member
1st Gear Member
Joined: May 2008
Posts: 942
From: Pineville, LA
Default

Mech said my valves looked great at 9K miles.... starts fine cold. My cam chain finally quit rattling... I hear my seat buzzing from the crappy hook latch more than anything LMAO
 
  #35  
Old 07-13-2009 | 10:57 AM
thommo77's Avatar
Senior Member
Joined: Jun 2008
Posts: 176
From: Blenheim, NZ
1st Gear Member
Default

2009 - first anniversary today! Only done 2600kms. Don't get out anywhere near as often as I'd like.
Sunny Nelson, New Zealand.
 
  #36  
Old 07-13-2009 | 03:50 PM
punkenduro09's Avatar
Senior Member
1st Gear Member
Joined: Jul 2008
Posts: 1,439
From: Murrieta, Ca
Default

ya i did my valves about at 7k, im going to check them again at the next oil change. they where in spec, but on the far side, and i was about to do a 1000 mile trip so i had them done. i have a question cliff, you still bending the big bars or did they help stop bending vs. the 7/8ths.
 
  #37  
Old 07-13-2009 | 06:58 PM
deej's Avatar
Your Humble Moderator/Admin
Joined: Nov 2005
Posts: 21,060
From: Washington
1st Gear Member
Default

06
12,200
Western Washington...(the best place ever!)
 
  #38  
Old 07-13-2009 | 07:42 PM
rockrash42's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Jun 2009
Posts: 33
From: placerville
Default miles vrs valve adjustment

Man, I am impressed with some of the mileage you all are getting on these bikes, Just a reminder, anyone who has experience with the older version klr's the thing that usually kills them is valve adjustments, and of course not changing out the oil, my understanding is the heads on both klr and klx run the cams in a journal that is cut directly in the head, there is no bearing to replace, if the surface is gouged or damaged you need a new head, so keep those engines running with clean oil and keep those valves adjusted, and then ride the shat out of them on my brothers.
 
  #39  
Old 07-13-2009 | 09:04 PM
roadglider's Avatar
Senior Member
Joined: Jan 2009
Posts: 349
1st Gear Member
Default

3385 miles pulling in the parking lot coming back from lunch. About 90% off road. Harrisonburg VA. Not quite a year old. I've got a buddy in Flagstaff he has a either 1999 or 2000 KLX 300 (can't remember for sure). He says just change the oil every three years or so LOL. From what I've heard and seen these things are about the most reliable bike since the mini trail 50.
 
  #40  
Old 07-14-2009 | 03:02 AM
Randy49's Avatar
Senior Member
1st Gear Member
Joined: Dec 2008
Posts: 118
From: Columbia,MO
Default

09 Klx 250s, bought in Oct.08, 2200 miles after nice ride early Sunday to beat the heat and storms. Live in Columbia Missouri .
 



All times are GMT. The time now is 09:26 AM.