Video: jumpin the 250
#11
cool thanks man! ill try that. will it make the bike sit higher though? Right when i got on my bike to hit this table top the first time, i scooted forward a little bit and stalled the bike and fell over I was off to a bad start
#13
The rebound screw on the bottom does the same thing, but affects the "rebound" portion of the stroke instead. The compression screw is on the top, rebound on the bottom.
#15
A huge +1 on the Enzo suspension. I had Craig in the MN office valve it properly, (I had already replaced the springs) and WHAT A DIFFERENCE!!! This is starting to be a very serious trail bike. I dragged a heavily mod'd WR250 today and was only a bike length behind which we both account to the taller gearing I'm running. The power is being put to the ground now. WHAT A DIFFERENCE!!! www.enzoracing.com
#17
The key to not bottoming out your suspension on these bigger table tops is to go faster and land on the downslope! hahahaa
There's one table top in town that's very fun to jump.. Gotta hit it in the middle of 3rd gear to clear it just perfectly.
There's one table top in town that's very fun to jump.. Gotta hit it in the middle of 3rd gear to clear it just perfectly.
#18
enzo specializes in kyb, so thats the parts they carry. i just listen to a podcast interviewing the owner, definally taking my stuff to then when i have everything rebuildt at some point.
Thread
Thread Starter
Forum
Replies
Last Post