Today is my bike's bday!

Thread Tools
 
Search this Thread
 
  #1  
Old 06-16-2009, 08:03 AM
jpaul310's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jul 2008
Location: Carson, CA.
Posts: 235
Default Today is my bike's bday!

I can't believe it's been a year now since I got my bike! I'm so glad I bought this bike! I'm trying to remember if I had any problems with my bike but the only thing I can think of is the occasional stutter but I found out what was causing it. It was because I drilled the slide 7\64 and I installed the dynojet shorter spring at the same time. I put the stock slide spring back on and the stutter was gone! That stutter was so annoying! Other than that, my bike is running strong and stutter free with over 5k miles. I really can't say it enough...I LOVE THIS BIKE!!!
 
  #2  
Old 06-16-2009, 08:17 AM
hercrigger's Avatar
Senior Member
1st Gear Member
Join Date: Apr 2009
Location: Belleville, ON
Posts: 102
Default

so bigger slide hole and shorter spring = bad mojo?
 
  #3  
Old 06-16-2009, 08:24 AM
jpaul310's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jul 2008
Location: Carson, CA.
Posts: 235
Default

From my experience...YES! I believe you lose vacuum pressure when you do both.
 

Last edited by jpaul310; 06-16-2009 at 08:34 AM.
  #4  
Old 06-16-2009, 08:56 AM
jpaul310's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jul 2008
Location: Carson, CA.
Posts: 235
Default

The mods I have done so far on my bike are..full muzzy exhaust with silencer on and spark arrestor removed, uni filter, snorkel removed, 124 dj main jet, 35 pilot jet, 2 1\2 turns out, kouba screw, clip on 3rd notch from top, drilled slide to 7\64 of an inch, smog stuff removed, drilled the airbox breather, tci rear rack, dunlop 606 front and rear tires with heavy duty tubes, edge 2 tail light with led blinkers, pro taper cr bend 7\8 bar, msr handguards and header wrapped. Wow...that sounds like a lot!
 
  #5  
Old 06-16-2009, 11:17 AM
hercrigger's Avatar
Senior Member
1st Gear Member
Join Date: Apr 2009
Location: Belleville, ON
Posts: 102
Default

good to know, stock spring it'll be then
 
  #6  
Old 06-16-2009, 01:51 PM
cliffsta's Avatar
Senior Member
1st Gear Member
Join Date: May 2008
Location: Pineville, LA
Posts: 942
Default

We all need to go in together on a cake... there's a BUNCH of us celebrating one year this week. June 19th is mine.
 
  #7  
Old 06-16-2009, 02:13 PM
deej's Avatar
Your Humble Moderator/Admin
1st Gear Member
Join Date: Nov 2005
Location: Washington
Posts: 21,060
Default

I can't believe I've had my bike for 3 and a half years. I can still remember the day. November 23 2005 I was so excited that I showed up at the shop an hour away and they were still putting it together. I think it was a probably to make me wait in the store and spend even more money......of course it worked. I am still proud of the fact that I bought the first one from that shop, and probably the first one to buy one on the peninsula. Heck I saw it on line two months before any of the dealers in Washington even got one in. I called them and told them I wanted the first one when it came in. They were like "what is it again?" I had to send them the link to the bike.
 
  #8  
Old 06-16-2009, 07:59 PM
hercrigger's Avatar
Senior Member
1st Gear Member
Join Date: Apr 2009
Location: Belleville, ON
Posts: 102
Default

gotta love dealers that are in the know with what they're selling
 
  #9  
Old 06-17-2009, 12:30 AM
punkenduro09's Avatar
Senior Member
1st Gear Member
Join Date: Jul 2008
Location: Murrieta, Ca
Posts: 1,439
Default

mines 7/17, im guessing this came up because of the letters kawi sends to try to extend the warrenty.
 
  #10  
Old 06-17-2009, 01:42 AM
Klxrelic's Avatar
Senior Member
1st Gear Member
1st Gear Member
Join Date: Oct 2008
Location: Newfoundland, Canada
Posts: 327
Default

July 26 --- 1 year. Last ride was April 19. I get home end of june. I got an itch that really needs scratchin'. This forum helps tho!
 


Quick Reply: Today is my bike's bday!



All times are GMT. The time now is 01:40 PM.