Hey i know this might sound kinda dumb but i was wondering if you take all the de smog tubes and crap off will that hert you on inspections like will it still pass?

and also i was planning on going to the hardware store to cap it all off what sizes and how many rubber caps should i get?

thanks guys

 

I used two 3/8" and one 1/8" rubber caps. I got them at NAPA auto. They slipped right on and work great.

 

It will only hurt you for inspection if they check for emissions(visual, sniffer, of both). I just looked at your profile, you shouldn't have a problem in PA. BTW where are you at in PA?

 

Its right outside of allentown.

 

Yes like most everyone has said you should be fine they do not really check that stuff that i have seen. You have to kinda out smart them, My recomendation is to take the air pump off and then make a plate- just trace onto a sheet of metal then cut out and then put back onto bike- then leave the hose on the so that it looks stock. for the pipe look on ebay for a stock KLX300R pipe and header and then you should be fine on the emissions inspection fear because it says the same thing on the can. good luck.

 

uponone is there any trails to ride in center valley?

 

ehh not really its pretty boring around here theres like a couple here and there but nothing worth your time...how about you?

 

I am still investagating. There is a post of the lackawana rail line a couple downthat is close its about 40miles round trip off road. If interested we could go just about any time. Still looking for more though.

 

man that sounds like alot of fun! ya..
Im intrested

 

We can set a weekend up, I am sure there are a few others that will join us.