Stiffer fork and shock springs for an '09

Reply Subscribe

Thread Tools

Search this Thread

#11

03-14-2010, 09:32 AM

ACOLE

Senior Member

1st Gear Member

Join Date: Jan 2010

Location: Far North New Zealand

Posts: 120

Quote:

Originally Posted by ACOLE

Excuse my ignorance but is it not possible to adjust the pre load on the 09 KLXs 250 front forks. I weigh 187lb and have about 1 1/2 inches of static sag. Also is there a replacement cap available for the top of the forks that has the air bleed screw in it.

Oh well. We don't have Moto Pro down here in NZ. Will have to check out local shops oterwise order online. Thanks dudes.
Any one got any part numbers suited for someone who weighs 187lb

Last edited by ACOLE; 03-14-2010 at 09:38 AM.

#12

03-15-2010, 05:22 PM

Feral Donkey

Senior Member

1st Gear Member

Thread Starter

Join Date: Feb 2010

Posts: 358

I adjusted the preload on my rear shock yesterday to try to make it a little better. All that did was make the spring bottom out sooner.

I'm saving up and getting some new springs.

#13

03-15-2010, 06:57 PM

dpippin

Senior Member

1st Gear Member

Join Date: May 2008

Location: Asheville NC

Posts: 129

Quote:

Originally Posted by ACOLE

Oh well. We don't have Moto Pro down here in NZ. Will have to check out local shops oterwise order online. Thanks dudes.
Any one got any part numbers suited for someone who weighs 187lb

I weigh 195 lbs and have been happy with the .44 fork springs

Check with Cogent Dynamics
They have .44 fork springs in stock and can have custom springs made for whatever weight you need.

Talk to Rick at Cogent

828-628-9025
e-mail raceparts@motocd.com
http://motocd.com/

Doug

#14

03-15-2010, 07:01 PM

dpippin

Senior Member

1st Gear Member

Join Date: May 2008

Location: Asheville NC

Posts: 129

Quote:

Originally Posted by ACOLE

Adjusting the spring pre-load (if you could) will not solve the problem.
Compressing the spring more does not change the spring rate.
If you have too much sag you need heavier springs.

#15

03-15-2010, 07:57 PM

ACOLE

Senior Member

1st Gear Member

Join Date: Jan 2010

Location: Far North New Zealand

Posts: 120

Thanks for the info.

#16

03-15-2010, 10:51 PM

wedge

Senior Member

1st Gear Member

Join Date: Apr 2006

Location: Olympia WA

Posts: 1,433

Quote:

Originally Posted by ACOLE

Oh well. We don't have Moto Pro down here in NZ. Will have to check out local shops oterwise order online. Thanks dudes.
Any one got any part numbers suited for someone who weighs 187lb

http://www.moto-pro.com/comparisonshop.asp

I don't know how much it would cost to ship(or how long) but he is a really helpful guy

is shipping from the USA out of the question?

#17

03-21-2010, 02:34 AM

Feral Donkey

Senior Member

1st Gear Member

Thread Starter

Join Date: Feb 2010

Posts: 358

How much is this going to set me back for a new set of heavier springs? I tried calling Moto-Pro the other afternoon several times and I kept getting the recorded message.

#18

03-21-2010, 03:33 AM

mattyw

Member

1st Gear Member

Join Date: Aug 2009

Location: Richmond, VA

Posts: 79

Quote:

Originally Posted by Feral Donkey

How much is this going to set me back for a new set of heavier springs? I tried calling Moto-Pro the other afternoon several times and I kept getting the recorded message.

Same question, anyone know what we are looking at ballpark cost for these?