rear sprocket
#1
rear sprocket
What other bike rear sprockets fit the 09 250s. When looking online no one lists the KLX in there lists.
*Edit* Found some that will work but no 39 tooth. Any recommendations?
*Edit* Found some that will work but no 39 tooth. Any recommendations?
Last edited by cegusman; 02-16-2012 at 01:49 PM.
#4
#5
can 16t fit a klx?...looked like the 15t was a tight fit...i couldn't even put back the case saver....
#6
If I went to a 45T in back (with a 14T up front), what length chain would I need? And if I went with, say, a 47 or 48T in back, would it need to be longer still? AND, could I run the longer chain with the 45 so I could swap between the two?
Rob
Rob
#7
Now at 45T rear with 13,14,15 up front and 108 link chain. At least that's what I think. Isn't stock 106?
I bought the longer chain and cut it to length.
#8
I run a 15T up front with the case saver in place. It's close between the chain and saver, but there is a gap and I never have observed any wear from contact between chain and saver. As close as the 15 is, I don't see how a 16T would fit with the saver.
#9
the case saver looked like it was almost touching the chain....i didn't even attempt to ride with the case saver on...i'll try tonight...