New graphics part 2
#1
07-01-2009 | 02:33 AM
Thread Starter
|
Senior Member
1st Gear Member
Joined: Oct 2006
Posts: 443
From: Pitt Meadows BC Canada.
New graphics part 2
Ok so after i put the new graphics on the last one was a pain in the A$$, the right side number plate would not smooth out due to the exhaust bulge, so i called Ryan at http://www.paytonthomas.com/and asked if he could make me up two more,
only this time with some numbers on, and this is what he came up with,
also he suggested I come over and he would put them on for me, I wasn't going to say no,
it took him half a hour with a heat gun and it looks much better
he also gave me some wheel stickers that reflect light at night, the more visible you are the better.
[img]
[/img]
[img]
[/img]
the wheel stickers
[img]
[/img]
[img]
[/img]
[img]
[/img]
only this time with some numbers on, and this is what he came up with,
also he suggested I come over and he would put them on for me, I wasn't going to say no,
it took him half a hour with a heat gun and it looks much better
he also gave me some wheel stickers that reflect light at night, the more visible you are the better.
[img]
[/img][img]
[/img]the wheel stickers
[img]
[/img][img]
[/img][img]
[/img]
#8
07-01-2009 | 03:41 AM
Thread Starter
|
Senior Member
1st Gear Member
Joined: Oct 2006
Posts: 443
From: Pitt Meadows BC Canada.
Thanks....and i didn't take it the wrong way, its all good.
