Mr. Post Man delivered!!
#4
Don't worry it ain't so bad. Just take your time and keep things organized and clean. I found Torque specs/top end and valve chart online I can Email it to you. It's all I needed to do mine. Just let me know.
I'm sure you will love it my 331 does 2nd gear throttle only wheelies and I now upshift to 6th on hills that I would previously bog down in 4th (stock gearing).
I'm sure you will love it my 331 does 2nd gear throttle only wheelies and I now upshift to 6th on hills that I would previously bog down in 4th (stock gearing).
Last edited by GreenMonsta; 03-13-2009 at 10:38 PM.
#5
I'm waiting on the same kit, I think I sent my money two days after you. I'm hoping to receive it soon! Good luck, and thanks goes to the rest of you for the advice on cups and pics for install.
#6
Yah, all good advice. I'm going to read Bake's thread again too..
I'm going riding in the morning, so that will be the last ride of the 250.
Then off to the car wash for a good spray down, and back home. Will probably start Monday morning. I'll do my best to take the pics along the way and do some sort of write-up, but it's all going to be new to me too so I don't know how well I could do that..
I'll see what I can do!
I'm going riding in the morning, so that will be the last ride of the 250.
Then off to the car wash for a good spray down, and back home. Will probably start Monday morning. I'll do my best to take the pics along the way and do some sort of write-up, but it's all going to be new to me too so I don't know how well I could do that..
I'll see what I can do!