Moose 13T Sprocket

Reply Subscribe

Thread Tools

Search this Thread

01-10-2007 | 11:37 PM

Fishfinder

Thread Starter

Member

1st Gear Member

Joined: Dec 2006

Posts: 73

From: Harriet, Ar.

Moose 13T Sprocket

I ordered a 13T sprocket from my Kawi dealer. They came up with a Moose #1212-0198 for a 06 KLX250S. I tried calling Parts Unlimited and their phones are tied up. I can't verify that this is the right sprocket. Anyone know if this is the correct part number for the Moose sprocket? Hate returns if they can be avoided. I am taking the bike in for service tomorrow, front fork leak, and will pick up the sprocket and high flow snorkel.

01-11-2007 | 05:06 AM

KAWASAKIspeed

Senior Member

1st Gear Member

Joined: Apr 2006

Posts: 223

From:

RE: Moose 13T Sprocket

i am not sure but that kinda sounds right. wait for some others to reply. good luck.

01-11-2007 | 05:49 AM

UTRoss

Member

1st Gear Member

Joined: Nov 2006

Posts: 68

From:

RE: Moose 13T Sprocket

If you haven't already proven you can loosen it, or don't have access to air tools, you may want to have the dealer loosen and hand tighten the retaining nut on the sprocket. I can't get mine off (I've tried using a decent sized breaker bar). Air tools are the answer, or so I have read. Hate to see ya get the sprocket and be left wondering how to deal with it. If your taking the bike in anyway, easy thing to have them sort out for you.

01-11-2007 | 07:48 PM

Guest

Guest

Posts: n/a

RE: Moose 13T Sprocket

Quote:

ORIGINAL: UTRoss

If you haven't already proven you can loosen it, or don't have access to air tools, you may want to have the dealer loosen and hand tighten the retaining nut on the sprocket. I can't get mine off (I've tried using a decent sized breaker bar). Air tools are the answer, or so I have read. Hate to see ya get the sprocket and be left wondering how to deal with it. If your taking the bike in anyway, easy thing to have them sort out for you.

nah, here's the KEY to breaking that front sprocket retaining nut loose- a SUDDEN JERK once you get the tool on it. you cannot muscle it off. you have to jerk it suddenly with the ratchet and it will come right off. i weigh 150 lbs and got it off by myself, although i do admit i lift a little bit so i'm no weakling. try it.