little problem after KCA removal

Thread Tools
 
Search this Thread
 
  #1  
Old 08-05-2008 | 04:16 PM
oaker's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Apr 2008
Posts: 70
From: R.I.
Default little problem after KCA removal

i pulled off the smog stuff, capped the exhaust,carb, and airbox now it seems like the rpms fluctuate a little at idle and when you let off the throttle it takes a second for the rpms to drop back down. i havent put a pipe on or jetted yet but im hopin when i do the problem goes away.
 
  #2  
Old 08-05-2008 | 04:35 PM
JRock420's Avatar
Senior Member
1st Gear Member
Joined: May 2008
Posts: 6,656
From: West By God Virginia!
Default

did you remove your snorkel or the whole airbox lid
 
  #3  
Old 08-05-2008 | 04:37 PM
oaker's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Apr 2008
Posts: 70
From: R.I.
Default

Originally Posted by JRock420
did you remove your snorkel or the whole airbox lid
i had the stock snorkel on, then i put on the kdx 200 snorkel and it seemed to improve a little
 
  #4  
Old 08-05-2008 | 04:46 PM
JRock420's Avatar
Senior Member
1st Gear Member
Joined: May 2008
Posts: 6,656
From: West By God Virginia!
Default

hmmmm Im not totally sure if that will affect it or not,,, more air needs more fuel thats all I know....
 
  #5  
Old 08-05-2008 | 04:52 PM
EMS_0525's Avatar
Da dirty moderator
1st Gear Member
Joined: May 2006
Posts: 12,584
From: Pittsburgh, PA
Default

yea..... you should put the stock snorkel back on til you rejet it.... getting too much air...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jpaul310
KLX 250S
32
04-19-2013 05:03 PM
jpaul310
DIY - Do It Yourself
10
03-25-2012 04:06 AM
oaker
KLX 250S
12
08-22-2008 09:55 PM
oaker
KLX 250S
3
07-27-2008 01:56 PM
DirtSurfer
KLX 250S
7
11-15-2006 01:01 AM



Quick Reply: little problem after KCA removal



All times are GMT. The time now is 07:34 PM.