KLX300 "06" & KLX250S "06" FRONT SPROCKET INTERCHANGABLE?
#11
RE: KLX300 "06" & KLX250S "06" FRONT SPROCKET INTERCHANGABLE?
Well, that's because you keep changing your jets, when all you need to do is cool them down[8D] Are you a red head, by any chance?
ORIGINAL: 09KLXowner
fingermullet- installing a jet kit and dialing it in is way different than whether or not a KLX300 front sprocket will fit a 250S.
fingermullet- installing a jet kit and dialing it in is way different than whether or not a KLX300 front sprocket will fit a 250S.
#12
RE: KLX300 "06" & KLX250S "06" FRONT SPROCKET INTERCHANGABLE?
ORIGINAL: 09KLXowner
fingermullet- installing a jet kit and dialing it in is way different than whether or not a KLX300 front sprocket will fit a 250S.
I'm pretty sure I know what I'm talking about.
fingermullet- installing a jet kit and dialing it in is way different than whether or not a KLX300 front sprocket will fit a 250S.
I'm pretty sure I know what I'm talking about.
#13
RE: KLX300 "06" & KLX250S "06" FRONT SPROCKET INTERCHANGABLE?
so finger- you never answered my question. In your opinion, will a KLX300R front sprocket bolt right onto a KLX250S? If you read my first reply, I said no. Are you saying I'm wrong? Just want to be sure where you stand on this one. Maybe you really don't know.[&:]
#14
RE: KLX300 "06" & KLX250S "06" FRONT SPROCKET INTERCHANGABLE?
ORIGINAL: 09KLXowner
so finger- you never answered my question. In your opinion, will a KLX300R front sprocket bolt right onto a KLX250S? If you read my first reply, I said no. Are you saying I'm wrong? Just want to be sure where you stand on this one. Maybe you really don't know.[&:]
so finger- you never answered my question. In your opinion, will a KLX300R front sprocket bolt right onto a KLX250S? If you read my first reply, I said no. Are you saying I'm wrong? Just want to be sure where you stand on this one. Maybe you really don't know.[&:]
Truth is, I don't know if the klx300 will or will not fit on the 250 ...... I've read about it numerous times and all said it does not fit, however I have no direct experience saying it does not. I don't even know if the splines are the same, maybe they are maybe they are not? Do you know???
Have you tried a klx300 sprocket on our lil klx? You seem to be so sure in your opinion.
Some things I do know
The Sprocket Specialist 13t listed on this forum fits
A stock klx 300 cylinder and piston will bolt right up
A stock klx 300 kick starter will bolt right up
A 340 kit as listed on this forum will bolt right up
A FCR 35 fits no problem and is worth the effort
A klx 300 fuel tank fits no problem except you have to use 300 rad shrouds
A Baja Designs headlight fits no problem
A Baja Designs led taillight fits no problem
A Maier rear fender fits no problem, well a little cutting
KTM turn signals fit on the klx better than the kawi stock ones
Moose Raptor Bend bars fit perfect along with their bark busters
A Guts Racing High Seat Foam and Cover fits perfect
A Muzzy Full System will bolt right up...and if you tweak the mid pipe .... no mods reqd for the pass foot peg
A k&n air filter for a klx300 fits perfect
A Blue Sea systems Circuit Reset makes a great starter button replacement
Stock KTM Mirrors fit our klx perfect
A Renthal 49 tooth rear sprocket will fit without modding the lower chain guard
A 100 watt halogen H4 headlight bulb works fine and will not drain the batt
A Utah Skid Plate fits perfect
MotoPro Springs and Valves are worth every penny
A Kenda 120 Trakmaster II is the biggest you want to put on the klx but a 110 is better
Ok, thats enough, the point of my post was to question why you always try to belittle people with stupid snide comments....get it.
Thread
Thread Starter
Forum
Replies
Last Post
canehdian_guy
KLX 250S
4
03-30-2015 05:03 PM
cjbiker
PRIVATE For Sale / Trade Classifieds
0
03-25-2013 11:56 PM