KLX 250 2011 Part Out
#11
04-25-2013 | 09:56 AM
Senior Member
1st Gear Member
Joined: Dec 2011
Posts: 366
From: Seychelles
Sent you an e mail regarding 330 piston/barrel. What mileage is on the 330 kit?
Any one on the forum want to advise on feasability of fitting a used 330 kit. What would you recommend changing, besides gaskets?Rings? Circlip?
Any one on the forum want to advise on feasability of fitting a used 330 kit. What would you recommend changing, besides gaskets?Rings? Circlip?
#12
04-25-2013 | 11:11 AM
Thread Starter
|
Member
1st Gear Member
Joined: Feb 2012
Posts: 42
Hi Graham, I sent you a message. I changed the piston myself and it was pretty straightforward so I can advise you if you want. Yes the kit did come with a new gasket for the cylinder so I think that is what you will need to get additionally. The cylinder is barely used and I will post a picture when I have it off the bike.
The postage rate if to the states so you can compare or evaluate total cost is $12 for each of the first 5 kg and $9 for every additional kg thereafter.
Anyway do not worry too much as any reasonable offer is going to be accepted
The postage rate if to the states so you can compare or evaluate total cost is $12 for each of the first 5 kg and $9 for every additional kg thereafter.
Anyway do not worry too much as any reasonable offer is going to be accepted
#13
04-25-2013 | 11:15 AM
Thread Starter
|
Member
1st Gear Member
Joined: Feb 2012
Posts: 42
Here is a picture of the speedo, gas tank, and right hand side radiator.
There must be a few of you who have laid the bike on the side and need some new radiators? I replaced some radiators on my Husky and they are mega expensive. The ones I took off were well squashed lol.
There must be a few of you who have laid the bike on the side and need some new radiators?
I replaced some radiators on my Husky and they are mega expensive. The ones I took off were well squashed lol.
#16
04-25-2013 | 06:56 PM
Senior Member
1st Gear Member
Joined: Jul 2012
Posts: 102
From: Socal
Thanks ahnh666, sent you a reply.
Yeah rgoers, it is not worth the hassle to steal this bike. Thy must have been pretty dumb because as you can see they hardly took anything of value, but they did manage to ruin it. It did have a fmf core and dynojet on it though, but you have to sell this to someone else who has a klx250. Very much doubt if there are that many here. Anyway in Cyprus, legal system is ****e so they would just get a fine and prob minimal jail time if any.
Also have a Reikon handlebar which is black and is a lot stronger and lighter than the stock one. If anyone is interested. Its as good as a renthal.
Yeah rgoers, it is not worth the hassle to steal this bike. Thy must have been pretty dumb because as you can see they hardly took anything of value, but they did manage to ruin it. It did have a fmf core and dynojet on it though, but you have to sell this to someone else who has a klx250. Very much doubt if there are that many here. Anyway in Cyprus, legal system is ****e so they would just get a fine and prob minimal jail time if any.
Also have a Reikon handlebar which is black and is a lot stronger and lighter than the stock one. If anyone is interested. Its as good as a renthal.
#17
04-25-2013 | 07:58 PM
Senior Member
1st Gear Member
Joined: Jun 2011
Posts: 1,135
From: San Francisco, CA
paid in full for front and rear 
...my precious~~~...all mine!...i'll probably have my front and rear sf wheels with s brake rotors for sale after the swap....
i bought a brand new unopened fmf megabomb from a guy in los angeles, ca...he ordered the header, but his klx250s was stolen...so, i went to la and picked it up from him for cheap...klx250 do get stolen...
...my precious~~~...all mine!...i'll probably have my front and rear sf wheels with s brake rotors for sale after the swap....Last edited by ahnh666; 04-25-2013 at 08:01 PM.
#18
04-25-2013 | 08:08 PM
Senior Member
1st Gear Member
Joined: Jul 2012
Posts: 102
From: Socal
[QUOTE=ahnh666;494476]paid in full for front and rear ...my precious~~~...all mine!...i'll probably have my front and rear sf wheels with s brake rotors for sale after the swap....
Awesome enjoy. I'm looking for an 18 to keep a paddle on up in pismo.
...my precious~~~...all mine!...i'll probably have my front and rear sf wheels with s brake rotors for sale after the swap....Awesome enjoy. I'm looking for an 18 to keep a paddle on up in pismo.
#19
04-25-2013 | 08:23 PM
Thread Starter
|
Member
1st Gear Member
Joined: Feb 2012
Posts: 42
$15 in total then assuming that I can put it in an envelope and post it for less than a few euro. Message me on my email aclear@gmail.com to confirm it mate.
Also let me send you a picture and length as my bike was fuel injected and yours must be using a carburettor. If you know that they use the same throttle cable than it will be okay.
Thanks.
Last edited by adrian2779; 04-25-2013 at 08:25 PM.
#20
04-25-2013 | 09:30 PM
Senior Member
1st Gear Member
Joined: Jun 2011
Posts: 1,135
From: San Francisco, CA
if you still have the key and both lock tumblers, that is worth more than the gas tank....i know because somebody broke my lock on my gas tank trying to open it...insurance paid me about $300 for new keys and lock tumbler for ignition and gas tank ($50 was for labor)
Last edited by ahnh666; 04-25-2013 at 09:32 PM.