Kickstand sensor heads up
#11
Thanks for posting this! As to the potential safety issues, I was riding on the 520 floating bridge here in Seattle yesterday when the engine died because (I think) of this switch. Heavy, afternoon traffic, no shoulder, no hazard lights, 60 mph to no power...bad news.
Just one of those things you don't think of until you have an entire bridge full of traffic baring down on you because you're stopping for no apparent reason. I think I'll bypass this "safety" for now.
Just one of those things you don't think of until you have an entire bridge full of traffic baring down on you because you're stopping for no apparent reason. I think I'll bypass this "safety" for now.
#12
Speaking of riding off with the kick stand down, I did that the other day as I left the post office. First time in 4 and a half and 14,000 miles that I forgot to kick it back up. For those worried that they might ride off with it down, that really is a decision that you have to make yourself. The liability is too high for any of us to say yes or no. If you do decide to bypass the switch all you have to do is take off the seat, follow the 2 wires up, unplug the switch from the circuit and plug in the 2 wires coming from the harness. That will close the circuit. Problem solved.
#13
Thanks for posting this! As to the potential safety issues, I was riding on the 520 floating bridge here in Seattle yesterday when the engine died because (I think) of this switch. Heavy, afternoon traffic, no shoulder, no hazard lights, 60 mph to no power...bad news.
Just one of those things you don't think of until you have an entire bridge full of traffic baring down on you because you're stopping for no apparent reason. I think I'll bypass this "safety" for now.
Just one of those things you don't think of until you have an entire bridge full of traffic baring down on you because you're stopping for no apparent reason. I think I'll bypass this "safety" for now.
#14
What am I Henny Youngman?.......
Suddenly realizing how old that reference is, deej tries to cover his tracks by stating... "that was some old guy my grandpa told me about"
Suddenly realizing how old that reference is, deej tries to cover his tracks by stating... "that was some old guy my grandpa told me about"
#16
I just took my stand right off and lean my bike against the nearest car when I park.
Just ****ting you, but I think the switch is more of a hazard when it is connected.
Just ****ting you, but I think the switch is more of a hazard when it is connected.
#17
I was thinking about takeing mine off soon as I got the bike. Then after the second time I stopped the bike put the kickstand down and got off leaving the key on for a while becuase the kickstand killed the engine & I plain old forgot I removed the switch completly.
Cheers Jim
Cheers Jim
#19
Oh and for everyone else FYI. You can easily tell how to defeat an interlock using the electrical schematics and electrical connections in the service manual. They will tell you what switch contacts close or open when the kickstand is up/down and clutch is pulled in/released. From there its pretty easy to figure out whether you need to jumper the connections or disconnect them.
Cheers!