Keihin FCR35 rebuilt by FSW
#1
Keihin FCR35 rebuilt by FSW
Jerry Leighton rebuilt at FSW
The new fuel mixture screw by FSW
Jerry Leighton rebuilt this carb way back in 2009, and again in 4/18. I had rejetted it for the big bore klx350s. And then it sat for 2 years with crappy gas sitting in it. Rendering it a expensive paperweight and useless. A stuck float valve needle/seat, clogged pilot & main jets, and emulsion tube debris just because someone didn’t turn off the petcock and run the carb dry. But now it’s back to turn the gals mild mannered Klx250s into a fire breathing mild mannered Klx250s
The new fuel mixture screw by FSW
Jerry Leighton rebuilt this carb way back in 2009, and again in 4/18. I had rejetted it for the big bore klx350s. And then it sat for 2 years with crappy gas sitting in it. Rendering it a expensive paperweight and useless. A stuck float valve needle/seat, clogged pilot & main jets, and emulsion tube debris just because someone didn’t turn off the petcock and run the carb dry. But now it’s back to turn the gals mild mannered Klx250s into a fire breathing mild mannered Klx250s
Last edited by RaceGass; 05-12-2018 at 08:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
chrisrigas
Ninja ZX-6R & ZX-6RR
4
05-01-2006 05:40 PM