jetting issue since big bore HELP

Thread Tools
 
Search this Thread
 
  #11  
Old 03-21-2011, 02:06 PM
T_i_G_e_R's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Apr 2010
Posts: 471
Default

Originally Posted by David R
I think its telling you to let it run @ 1500 RPM. Perhaps you should listen to it.

David
Well said. I agree.. other than the low idle bog.. it runs perfectly if idle is 1500. I think CV carb does a good job otherwise.
 
  #12  
Old 03-22-2011, 11:31 PM
Bake's Avatar
Senior Member
1st Gear Member
Join Date: Jan 2007
Posts: 287
Default

You're pretty close I think. A notch too rich on the needle and turn down the airscrew to 2.5 is my guess. I do the airscrew this way:
Turn up until standard idle begins to rise, turn down until idle barely starts to stumble, half way between is the baseline. If it's stumbling at low rpm throttle chop like that, it's rich on the low speed circuits IMO. Also, the stock carb does need the slide drilled, as that is also a low rpm mod.
FWIW, the powerbomb showed a power loss on the 351 dyno runs.
 
  #13  
Old 03-22-2011, 11:37 PM
Bake's Avatar
Senior Member
1st Gear Member
Join Date: Jan 2007
Posts: 287
Default

Originally Posted by T_i_G_e_R
I think CV carb does a good job otherwise.
We developed my set up for 351 #3 using the slide modified stock carb and 1/2" drilled stock exhaust and I was always happy with that combination. The lowend and the midrange pull of the 351 is awesome. It really delivers the "tractor" power, and for some, that makes the best trail riding engine.
 
  #14  
Old 03-23-2011, 11:00 AM
David R's Avatar
Senior Member
1st Gear Member
Join Date: Sep 2010
Location: Western NY
Posts: 695
Default

351 changes the bike from a weed whacker to a thumper!

Slide carb makes it a thumper with attitude.

David
 
  #15  
Old 03-23-2011, 03:28 PM
T_i_G_e_R's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Apr 2010
Posts: 471
Default

Originally Posted by Bake
FWIW, the powerbomb showed a power loss on the 351 dyno runs.
Hard to believe the powerbomb would result in a decrease in power with the right silencer, jetting, airbox, filter.. something must have been off with that dyno result.. I love the megabomb (megabomb is bigger than powerbomb) and the low end torque is awesome with that pipe
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frampton
KLX 250S
4
07-09-2013 11:24 AM
mattyw
KLX 250S
7
10-02-2009 02:02 PM
punkenduro09
KLX 250S
17
05-06-2009 07:53 PM
mudjunkie
KLX 250S
4
06-28-2007 01:59 AM
maniac
KLX 250S
36
05-26-2007 12:36 PM



Quick Reply: jetting issue since big bore HELP



All times are GMT. The time now is 09:40 AM.