I won`t run... HELP!!!
#21
There is a diagnostic port in my 2018 under the seat. You short the wire to the frame and turn the key on. It gives a blink code on the dash. I'll see what I can find and post it up.
Toph
Toph
Last edited by Topher749; 07-12-2019 at 02:13 PM.
#24
An update.
Put the bike back together yesterday and put fresh fuel in, it started straight away but after a few minutes(and a spin up the road and back) it started miss-firing and stopped(It did seem to have more power to it, i`m sure down to the fresh fuel)
This morning i fitted another (Iridium)spark plug (a little used one of the same type/grade out of my old bike) and all is well!!! No miss-fire or stopping after a few minutes of ticking over either.
I did put the old fuel into my MZ Mastiff (Yamaha 660 twin CARB engine) which had a nearly empty tank, and that started and ran ok on.
Thanks for all your help guys
Put the bike back together yesterday and put fresh fuel in, it started straight away but after a few minutes(and a spin up the road and back) it started miss-firing and stopped(It did seem to have more power to it, i`m sure down to the fresh fuel)
This morning i fitted another (Iridium)spark plug (a little used one of the same type/grade out of my old bike) and all is well!!! No miss-fire or stopping after a few minutes of ticking over either.
I did put the old fuel into my MZ Mastiff (Yamaha 660 twin CARB engine) which had a nearly empty tank, and that started and ran ok on.
Thanks for all your help guys
Thread
Thread Starter
Forum
Replies
Last Post