I don't know what I'm going to do with this.
. That's not good.
#12
03-07-2011, 01:53 AM
We'll see when it gets here. I'm not expecting anything. It could be a chunk of nikasil that came off or it could be a chunk of lint.
#13
03-11-2011, 08:56 PM
It's scratched up pretty bad in the bore. It looks like a ring broke into pieces and made deep scratches in the bore. It looks like 2mm over will clean it up.
Just for kicks I used my calipers to measure some distances on the water jackets of both this jug and the 250 jug. Exactly the same. There are subtle differences in the castings here and there but they're really the same part, one with a 72mm bore and one with a 78mm bore. Now what to do with this $200 boat anchor.
Just for kicks I used my calipers to measure some distances on the water jackets of both this jug and the 250 jug. Exactly the same. There are subtle differences in the castings here and there but they're really the same part, one with a 72mm bore and one with a 78mm bore. Now what to do with this $200 boat anchor.
#14
03-11-2011, 09:09 PM
It's scratched up pretty bad in the bore. It looks like a ring broke into pieces and made deep scratches in the bore. It looks like 2mm over will clean it up.
Just for kicks I used my calipers to measure some distances on the water jackets of both this jug and the 250 jug. Exactly the same. There are subtle differences in the castings here and there but they're really the same part, one with a 72mm bore and one with a 78mm bore. Now what to do with this $200 boat anchor.
Just for kicks I used my calipers to measure some distances on the water jackets of both this jug and the 250 jug. Exactly the same. There are subtle differences in the castings here and there but they're really the same part, one with a 72mm bore and one with a 78mm bore. Now what to do with this $200 boat anchor.
Good luck
Dan
#15
03-11-2011, 09:18 PM
Join Date: Jan 2008
Location: SW Ontario, Canada
Posts: 869
From the description, it sounds like they'll take care of it.
#18
03-11-2011, 11:21 PM
Join Date: Jan 2010
Location: kootenay country BC Canada
Posts: 1,800
From the eBay listing:
Hello buyers!
We sell used parts, not new. Please keep in mind there may be a scratch or two, a rusty bolt or bad seal, something like that, but they are all usable parts! If there are any problems it will be pictured and/or stated above. If they are junk they are tossed in the trash, but sometimes a mistake is made. Contact us prior to feedback. We want to satisfy you 100%. So please if there is an error contact us don’t snap or get upset and leave bad feedback!
They say 100% satisfaction, so:
Get your money back! including ALL shipping costs.
Hello buyers!
We sell used parts, not new. Please keep in mind there may be a scratch or two, a rusty bolt or bad seal, something like that, but they are all usable parts! If there are any problems it will be pictured and/or stated above. If they are junk they are tossed in the trash, but sometimes a mistake is made. Contact us prior to feedback. We want to satisfy you 100%. So please if there is an error contact us don’t snap or get upset and leave bad feedback!
They say 100% satisfaction, so:
Get your money back! including ALL shipping costs.
#19
03-12-2011, 06:36 AM
I already know how that will all go down. "Man, it like says it's got scratches in the description and stuff." he'll say. I'm going to eat it. I can get a Wiseco 80mm piston and ring set and there's a place in the east side of Madison that can bore and plate it. Or if I could get a 330 piston kit somehow and have it bored and plated to that. Maybe just send it out to Kustom Kraft and have them do the whole thing with gaskets and everything.