I don't know what I'm going to do with this.
#1
I don't know what I'm going to do with this.
I had a moment of impulse buying yesterday.
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
Look at the pics of the bore. Does that look like dirt or a messed up bore? I guess I'll have to wait and see.
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
Look at the pics of the bore. Does that look like dirt or a messed up bore? I guess I'll have to wait and see.
#5
If it's really messed up they say they'll make it good. A bit of light surface rust and some sort of bit of lint in the photo. DO NOT PANIC ............................. YET.
#7
Nope, no piston. I tell you what though. If the 300 piston is like the 250 piston, I'd rather have the forged Wiseco piston and rings anyway. Can you hone the Nikasil? I honed the sleeve in my 80mm jug. That sleeve material is some tough stuff! I have a friend with an '09 250s and a friend with a '06 250s. I'll see if they want it. If the nikasil is narfed up, it'll be used as a core for a big bore project.
#9
Listing is closed so I could not see but from reading the comments it sounds like you picked up a bored out nikasil plated cyl. My experiance was the nikasil is tough stuff but my 330cly must have had a thin wall becuase it cracked. I am now a fan of the sleaved cyl's
If you picked up a 330cyl contact bill blue. he has my old 330 piston and said it was in excelent condition.
Cheers Jim
If you picked up a 330cyl contact bill blue. he has my old 330 piston and said it was in excelent condition.
Cheers Jim