Hard start 351 and tm36-68

Thread Tools
 
Search this Thread
 
  #11  
Old 11-09-2015, 05:27 PM
Oldad's Avatar
Senior Member
1st Gear Member
Join Date: Sep 2013
Location: Southern Illinois
Posts: 168
Default

When did you last check your valve lash?

I had similar symptoms on my TW a few years ago. Jacked with the carb forever and finally found that the intake valve was out of adjustment. Set the valves and then ran like a champ.
 
  #12  
Old 11-09-2015, 05:30 PM
Dash8's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jul 2015
Location: Milton Ont Canada
Posts: 302
Default

Originally Posted by Oldad
When did you last check your valve lash?

I had similar symptoms on my TW a few years ago. Jacked with the carb forever and finally found that the intake valve was out of adjustment. Set the valves and then ran like a champ.
I checked the valves when I did the 351 2 weeks ago, all in spec... Good call tho, I think I'm gonna break her open and check the timing again, so I'll recheck the valves...
 
  #13  
Old 11-10-2015, 10:43 PM
taxonomy's Avatar
Senior Member
1st Gear Member
Join Date: Nov 2012
Posts: 269
Default

I only use the choke in very cold conditions. I just whack the throttle open, this activates the accelerator pump, then it usually starts right up.
 
  #14  
Old 11-10-2015, 10:46 PM
Dash8's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jul 2015
Location: Milton Ont Canada
Posts: 302
Default

Originally Posted by taxonomy
I only use the choke in very cold conditions. I just whack the throttle open, this activates the accelerator pump, then it usually starts right up.
So open it then close, then starter, or open and start with throttle open?

( I blame pain meds if that made no sense at all )
 
  #15  
Old 11-11-2015, 12:32 PM
taxonomy's Avatar
Senior Member
1st Gear Member
Join Date: Nov 2012
Posts: 269
Default

Open the throttle wide with the bike off then close the throttle. This shoots some gas into the carb from the AP. Mine will usually start with the throttle closed after that. The squirt from the AP richens it up.


If it's quite cold out, less than 50 degrees, I use the choke. It doesn't really need it much when it's warmer than that.
 
  #16  
Old 11-17-2015, 03:29 AM
durielk's Avatar
Senior Member
1st Gear Member
Join Date: Jul 2011
Location: Cottonwood, AZ USA
Posts: 1,728
Default

Your pilot screw is suppose to be adj while running, come on get with it!

!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cegusman
KLX 250S
14
09-25-2012 02:08 PM
David R
KLX 250S
85
03-18-2011 02:12 AM
IQOUTLAW
KLX 250S
19
03-23-2010 02:33 PM
dngrrngr
KLX 250S
2
05-07-2009 02:15 PM
bailor
KLX 250S
6
02-28-2009 01:08 PM



Quick Reply: Hard start 351 and tm36-68



All times are GMT. The time now is 07:40 PM.