Hanging idle
#13
Yeah, mine ran great except for I couldn't get the idle right. It would idle fine then jump up to 2000 rpm for 20 seconds than back to normal idle. Or it would hang when I came to a light. It just sporadically ran like this.
I tore my hair out trying to find vacuum leaks, clogged jets, etc. I finally put the stock 35 pilot in it and it fixed everything.
I tore my hair out trying to find vacuum leaks, clogged jets, etc. I finally put the stock 35 pilot in it and it fixed everything.
#14
Yeah, mine ran great except for I couldn't get the idle right. It would idle fine then jump up to 2000 rpm for 20 seconds than back to normal idle. Or it would hang when I came to a light. It just sporadically ran like this.
I tore my hair out trying to find vacuum leaks, clogged jets, etc. I finally put the stock 35 pilot in it and it fixed everything.
I tore my hair out trying to find vacuum leaks, clogged jets, etc. I finally put the stock 35 pilot in it and it fixed everything.
#15
Yes, when I put in the big bore, I bumped up to a 38 pilot.
Could not for the life of me get it to idle right.
I don't know if its the elevation or what, but my bike apparently doesn't need a whole lot of fuel.
Could not for the life of me get it to idle right.
I don't know if its the elevation or what, but my bike apparently doesn't need a whole lot of fuel.
#16
I see no reason that increasing the bore size would require a larger pilot jet, which controls idle mixture. Increasing the bore, does not result in much change in fuel/air requirements of idle speed.
#17
Yeah, mine ran great except for I couldn't get the idle right. It would idle fine then jump up to 2000 rpm for 20 seconds than back to normal idle. Or it would hang when I came to a light. It just sporadically ran like this.
I tore my hair out trying to find vacuum leaks, clogged jets, etc. I finally put the stock 35 pilot in it and it fixed everything.
I tore my hair out trying to find vacuum leaks, clogged jets, etc. I finally put the stock 35 pilot in it and it fixed everything.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post