I purchased some Zeta hand guards for my SF and I realized they won't work with the OEM bars. Does anyone have recommendations for a handlbar replacement? I have seen pics with Zeta bars on however I am not sure what size/bend to get.

Chris

 

Pro Taper CR MID and do not trim off the ends...

 

I have KX High Pro Tapers. Fit pretty good.

 

Why don't they fit?

 

Im guessing its because of the metal blocks welded into the ends of the bars.

Paul
________
Free **** xxx

 

Why do they do that?

Tusk bars from Rocky Mountain ATV are a pretty good value. Here's a good link for size info: http://www.rockymountainatv.com/handlebarinfo.do

 

Not sure why but heres a How to; to get around it if you have the time/tools.

https://www.kawasakiforums.com/forum...ad.php?t=22931
________
EXPERT INSURANCE

 

this worked for me. just used the stock 8MM bolts that came with the kit (cycra) and tapped into the weights.

 

I went with the Pro Taper KX low bend from Rocky Mtn ATV. Pretty much the same spec's as the CR Mid's however not as tall.

Any advise on do's and dont's of replacing the bars? Wasn't sure if there was an order of operations....

Thanks!

Chris

 

For mine the cables were too short.