Front fender

Thread Tools
 
Search this Thread
 
  #1  
Old 03-25-2011, 04:09 PM
trail Joe's Avatar
Junior Member
1st Gear Member
Thread Starter
Join Date: Nov 2010
Posts: 15
Default Front fender

After installing the 351 and TM33/34 carb on my wifes '07, the bike could stand to look a bit meaner to match its new found attitude. I am looking to find something a bit more modern. Would a front fender from an 09+ work? What other front fenders have you tried?
 
  #2  
Old 03-25-2011, 04:36 PM
EMS_0525's Avatar
Da dirty moderator
1st Gear Member
Join Date: May 2006
Location: Pittsburgh, PA
Posts: 12,584
Default

acerbis teknic front fender... mine is black and green you can get green and white.
Name:  misc026.jpg
Views: 91
Size:  142.4 KB

Name:  stuff043.jpg
Views: 74
Size:  55.5 KB

Name:  stuff042.jpg
Views: 81
Size:  62.7 KB

Name:  stuff041.jpg
Views: 76
Size:  85.8 KB
 
  #3  
Old 03-25-2011, 08:56 PM
trail Joe's Avatar
Junior Member
1st Gear Member
Thread Starter
Join Date: Nov 2010
Posts: 15
Default

That looks a lot better than the stock fender. I quickly looked around and couldn't find Green/white or Green/black like yours, where do you get your from?
 
  #4  
Old 03-26-2011, 12:20 AM
EMS_0525's Avatar
Da dirty moderator
1st Gear Member
Join Date: May 2006
Location: Pittsburgh, PA
Posts: 12,584
Default

I have actually replaced the front piece once already too.
Name:  bc6a904a.jpg
Views: 60
Size:  72.4 KB

I thought i got it from thumpertalk...

A KX250 fender will fit on it also.
Name:  NE061.jpg
Views: 77
Size:  112.0 KB
 

Last edited by EMS_0525; 03-26-2011 at 12:25 AM.
  #5  
Old 03-26-2011, 10:13 AM
EMS_0525's Avatar
Da dirty moderator
1st Gear Member
Join Date: May 2006
Location: Pittsburgh, PA
Posts: 12,584
Default

mmmm...... doing research i cant find it now either.... maybe they stopped making it. Hope not. Mine has a nice huge road rash mark on it. I can see needing a new one sooner or later again...
 

Last edited by EMS_0525; 03-26-2011 at 10:18 AM.
  #6  
Old 03-28-2011, 02:58 PM
trail Joe's Avatar
Junior Member
1st Gear Member
Thread Starter
Join Date: Nov 2010
Posts: 15
Default

Guess i'll look at KX250 fenders. What did you do to the rear license plate holder, looks much cleaner than the stock one.
 
  #7  
Old 03-28-2011, 03:18 PM
EMS_0525's Avatar
Da dirty moderator
1st Gear Member
Join Date: May 2006
Location: Pittsburgh, PA
Posts: 12,584
Default

Just took the bracket that the plate bolted to and bolted it to the fender
Name:  P1010002copy2.jpg
Views: 96
Size:  155.9 KB

Name:  aftereastr002.jpg
Views: 63
Size:  263.9 KB
 
  #8  
Old 03-28-2011, 10:54 PM
trail Joe's Avatar
Junior Member
1st Gear Member
Thread Starter
Join Date: Nov 2010
Posts: 15
Default

Cool, i'll have to do that. What flush mount rear blinkers are those?
 
  #9  
Old 03-29-2011, 12:16 AM
Stroker331's Avatar
Senior Member
1st Gear Member
Join Date: Jan 2011
Posts: 165
Default

I had a couple different flush mounts like those on my DR350. The first were regular bulbed and were not that visible during the daytime. Then i got led versions that were better. Watch the cheaper ones since the LED's used are not multi-directional and were only bright from a certain angle.
 
  #10  
Old 03-29-2011, 12:35 AM
EMS_0525's Avatar
Da dirty moderator
1st Gear Member
Join Date: May 2006
Location: Pittsburgh, PA
Posts: 12,584
Default

just 15$ ones off ebay i think. Dont buy this taillight/license plate holder.
Name:  biketail005.jpg
Views: 83
Size:  40.2 KB

Name:  rack009.jpg
Views: 51
Size:  154.6 KB

Name:  rack011.jpg
Views: 67
Size:  132.5 KB
 


Quick Reply: Front fender



All times are GMT. The time now is 09:33 PM.