Front brake cable extreme flexing?
#11
Dan
#12
You should have the zip ties open enough to allow the brake line to slide upward and flex at the loop above the triple clamp, not tight at the bottom of the slider. you might be able to use three zip ties to make an eyelet. Make a loose loop for the brake line, then zip tie that loop to another zip tie around the fork leg - three makes it so the one around the line and the one around the fork leg are in the same plane (horizontal) with the other locking the two together in a vertical direction around them. That might work as a temp solution.
I would either get it to flex at the right place or I'd park it until I could get the slider guard where the line can attach properly.
You need to do exactly that.
Last edited by klx678; 08-05-2013 at 08:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post