fmf powerbomb on its way
#3
Hey gents are you getting the fmf powerbomb steel, and how much if you don't mind me asking are you paying. Up here in Canuck land it's $310.95cdn which seems a lot and for that money I as a mechanic could make my own.
#8
I'm runnin 128 main, stock pilot, 2.75 turns.
to get my header pipe to fit the 2bros i had to take it to the muffler shop and have the diameter slightly increased until it was a good fit. go slow the metal there is thin.
oh yeah... the p bomb header loves to eat blue jeans!
to get my header pipe to fit the 2bros i had to take it to the muffler shop and have the diameter slightly increased until it was a good fit. go slow the metal there is thin.
oh yeah... the p bomb header loves to eat blue jeans!
#9
I had abit of a time w/ the slip fit on the powerbomb header, it wouldn't slip in all the way. So I copied the stock header slits cut out. Made it really easy to install and not leak. I went to a 40 pilot jet w/ kouba screw 1.5 - 1.75 turns out, 132 dj main
Last edited by RaceGass; 04-15-2009 at 12:09 AM.