Anyway to know?
#41
#125 Kaw, I assume, because I don't think DJ has a #125?
#42
Yeah, EMS is (was) running the Kawasaki jets.
I settled on the DJ 120 main, third clip on the DJ needle.
Put it back together and she started right up.
No flames out the back but it's pretty loud in the basement.
Idles smooth with no choke after a few seconds. Big improvement there.
Throttles up and down nicely.
Can't really tell how it runs because I still have a flat tire which started me down this road in the first place.
Temperatures forecast in the Twenties for the next few days.
Not too worried because I know I've got the biggest part done.
This was a great experience for me, overcoming some fear and getting acquainted with my bike. I've gained some confidence (probably just enough to really screw things up).
Thanks again to all who helped.
I'll post back here to let everyone know how the jetting performs.
I settled on the DJ 120 main, third clip on the DJ needle.
Put it back together and she started right up.
No flames out the back but it's pretty loud in the basement.
Idles smooth with no choke after a few seconds. Big improvement there.
Throttles up and down nicely.
Can't really tell how it runs because I still have a flat tire which started me down this road in the first place.
Temperatures forecast in the Twenties for the next few days.
Not too worried because I know I've got the biggest part done.
This was a great experience for me, overcoming some fear and getting acquainted with my bike. I've gained some confidence (probably just enough to really screw things up).
Thanks again to all who helped.
I'll post back here to let everyone know how the jetting performs.
#46
I'll order up a set for top and bottom next parts order.
Did you get your motor back together?
#47
I buggered the one on the side before I figured out I didn't have to take it off. Ordered a new one from bike bandit but I put some red lock tight on the old one and got it pretty tight.
I'll order up a set for top and bottom next parts order.
Did you get your motor back together?
I'll order up a set for top and bottom next parts order.
Did you get your motor back together?
Glad you got it going.
Dan
#48
all of them.
got mine from Ace hardware. Somewhere around $0.35 to $0.50 apiece. and some spares.
#49
I buggered the one on the side before I figured out I didn't have to take it off. Ordered a new one from bike bandit but I put some red lock tight on the old one and got it pretty tight.
I'll order up a set for top and bottom next parts order.
Did you get your motor back together?
I'll order up a set for top and bottom next parts order.
Did you get your motor back together?
Not yet. Starting today after work.
#50
Ordered a new one from bike bandit but I put some red lock tight on the old one and got it pretty tight.