Acerbis tanks are in
#11
Check the justgastanks.com site. This is right from it:
"Can fit 2009 Models but some harnesses will need to be relocated along with the petcock hitting the choke.
You can see a write up here:
KLX-250s Acerbis Tank - gsnorcal's Photos "
And there are many other 2009 write-ups here on this forum and some of the others.
"Can fit 2009 Models but some harnesses will need to be relocated along with the petcock hitting the choke.
You can see a write up here:
KLX-250s Acerbis Tank - gsnorcal's Photos "
And there are many other 2009 write-ups here on this forum and some of the others.
#12
Oh cripes, this is the pre-2009 tank that doesn't fit right on 2009s. The ones I've seen installed did not fit the seat so you had a big gap there that maybe you are willing to tolerate for the increased capacity.
So this isn't the new 2009+ tank that many of us have been waiting for.
So this isn't the new 2009+ tank that many of us have been waiting for.
#13
Oh cripes, this is the pre-2009 tank that doesn't fit right on 2009s. The ones I've seen installed did not fit the seat so you had a big gap there that maybe you are willing to tolerate for the increased capacity.
So this isn't the new 2009+ tank that many of us have been waiting for.
So this isn't the new 2009+ tank that many of us have been waiting for.
#18
I'm in for my turn at a step-by-step. So many others preceding me with theirs are very appreciated. I often reference one of Dirtsurfer's from 2006 or '07. How do we get the best of these into a sticky (e.g., FAQ)? There's been a number of good ones over the past few months that shouldn't be just allowed to age into oblivion. Oil filters, gold valve install, chain sliders...
Deej - how do we sticky some of the better threads?
As for tank install, that's going to be a couple weeks or so. Riding tomorrow. But would like to have this on before Moab. Tank and locking cap with their packaging as shown in photo weigh in at 6.25 lbs. I'll weigh the stock later, unless someone already has it...
Cheers!
Deej - how do we sticky some of the better threads?
As for tank install, that's going to be a couple weeks or so. Riding tomorrow. But would like to have this on before Moab. Tank and locking cap with their packaging as shown in photo weigh in at 6.25 lbs. I'll weigh the stock later, unless someone already has it...
Cheers!
Last edited by IDRIDR; 04-03-2011 at 05:49 AM.
#20
Dan