140 main part # ?
#1
140 main part # ?
does anybody have the ron ayerspart # for a 140 main jet? after gettin my slip on installed a while back i was ready to jump right in an re jet my bike but then i started to do my homework andafter alot of reading and studying i think i am ready. i have decided to try a 40 pilot and the 140 main with the N1TC needle on the second clip and drill the slide to 7/64ths, fuel screw at 2 turns. my elevation is about 1200' and i plan on doing the crankcase and smog mods and running no lid. i will also install the adjustable t handle fuel screw while i have the carb out. i hope this will be a good combination. from the charts posted here at this forum and everyones input i am hoping for success. thanks for the knoledge everyone, i have found a ton of info. from this forum. i would also like to pass on this address for others that have jetting questions. this site will really help you. http://scootrs.com/tech.cfm?tip=tunecarb [8D]
Thread
Thread Starter
Forum
Replies
Last Post
Dorian Gray
PRIVATE For Sale / Trade Classifieds
1
09-14-2013 10:12 PM