12vdc. Where?

Thread Tools
 
Search this Thread
 
  #1  
Old 10-09-2012 | 07:54 AM
yankee99's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Aug 2012
Posts: 71
From: pattaya, thailand
Default 12vdc. Where?

I am installing a outle for my gps and need 12v. I know i can get it from the battery but can it be gotten up front?

Name:  20121009_142617.jpg
Views: 61
Size:  291.8 KB

Name:  20121009_142636.jpg
Views: 61
Size:  247.9 KB
 
  #2  
Old 10-09-2012 | 02:23 PM
deej's Avatar
Your Humble Moderator/Admin
Joined: Nov 2005
Posts: 21,060
From: Washington
1st Gear Member
Default

I wired mine right to the battery, that way I can trickle charge backwards through the socket with my battery tender. Just install a 20 amp inline fuseholder.
 
  #3  
Old 10-09-2012 | 02:35 PM
TNC's Avatar
TNC
Senior Member
Joined: Sep 2009
Posts: 5,050
From: Abilene, TX
1st Gear Member
Default

Originally Posted by deej
I wired mine right to the battery, that way I can trickle charge backwards through the socket with my battery tender. Just install a 20 amp inline fuseholder.
Agree. Trying to splice off the minimal size wiring in the harness up around the triple clamp area isn't the best option. It's better for an accessory power outlet to have its own dedicated power supply with a heavier wire fused right from the battery. You can also get some heavy duty heat shrink to wrap the two wires and/or a small diameter spiral wrap to protect them. deej's suggestion of using the accessory outlet is also a good idea for using a battery tender, and you can even keep the battery topped off out in the field from your camping/travel/towing vehicle in camp through that socket via the vehicle battery. This can be really helpful during cold weather camping and riding.
 
  #4  
Old 10-09-2012 | 03:34 PM
RimBender's Avatar
Senior Member
Joined: Sep 2009
Posts: 618
From: WA state
1st Gear Member
Default

cigar socket has potential of a high load device being plugged into it, so I agree that it should be fused and wired directly to the battery. Fuse should be near the battery in case the wiring short or grounds.
 
  #5  
Old 10-09-2012 | 04:19 PM
rgoers's Avatar
Senior Member
1st Gear Member
Joined: Mar 2011
Posts: 854
From: Northern Utah
Default

I did the same as Deej (no, I didn't WASH my bike again today...) I put the pigtail at the battery end. It just sticks out over my coolant tank. I originally put it there to trickle charge the battery, but then I found a cool 12v socket that plugs right into it.
 
  #6  
Old 10-09-2012 | 08:18 PM
drm's Avatar
drm
Senior Member
Joined: Jul 2011
Posts: 547
From: middle tennessee; 600ft asl
1st Gear Member
  #7  
Old 10-10-2012 | 05:05 AM
yankee99's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Aug 2012
Posts: 71
From: pattaya, thailand
Default

ok thanks for all the good advice. I ran it to the battery just have to locate a fuse holder...
 
  #8  
Old 10-10-2012 | 06:37 AM
Satonic's Avatar
Member
1st Gear Member
Joined: Jun 2012
Posts: 31
Default

Originally Posted by yankee99
ok thanks for all the good advice. I ran it to the battery just have to locate a fuse holder...
That's a nice looking 12v socket. Did you get it here or online? I think I'll do the same as I use my iPhone as my gps and the battery life is terrible!

Cheers
 
  #9  
Old 10-10-2012 | 03:00 PM
rgoers's Avatar
Senior Member
1st Gear Member
Joined: Mar 2011
Posts: 854
From: Northern Utah
Default

Exact setup I have on mine... When I ride, I clip my GPS to something strapped on the rear anyway, so no need to have a socket up front.
 
  #10  
Old 10-10-2012 | 04:33 PM
yankee99's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Aug 2012
Posts: 71
From: pattaya, thailand
Default

@satonic
the bracket was made from ss locally 100baht

It might be a good idea to order a fuse holder too

12v Waterproof Accessory Cigarette Power Socket L MOUNT | eBay
 



All times are GMT. The time now is 09:32 AM.