12Oclock labs SpeedoDRD calibrater
#21
I think you may need to remove the stock front fender to do this IIRC.
#22
Just got one of these today
will install this week
from my calculations I may start out at -10%
just need to read up on how to program it, scanning the instructions looks complicated
for those that have one, do I take out the speedo and look for the connector?
or where exactly does it tap into just so I dont have to tear apart too much
will install this week
from my calculations I may start out at -10%
just need to read up on how to program it, scanning the instructions looks complicated
for those that have one, do I take out the speedo and look for the connector?
or where exactly does it tap into just so I dont have to tear apart too much
BYW - mine was off exactly 9.7%. Now it's accurate to a 10th of a MPH according to my GPS.
Instructions look complicated, but the process really isn't. Read it through a few times until it makes sense.
#23
got mine installed
5 min install, 5 min to figure out how to program (kind of hard) only because you have to jump around on the instructions
set mine to -11%
dead on to my gps at all speeds, fast or slow
so im happy works great
took some pics
after removing the headlight shroud only
Just happens the white connector you tap into was just sitting right there
after that you can just close everything back up
I left it loose incase I needed to readjust it
then I tucked it under the black rubber cover over my gauges and I can access it any time
5 min install, 5 min to figure out how to program (kind of hard) only because you have to jump around on the instructions
set mine to -11%
dead on to my gps at all speeds, fast or slow
so im happy works great
took some pics
after removing the headlight shroud only
Just happens the white connector you tap into was just sitting right there
after that you can just close everything back up
I left it loose incase I needed to readjust it
then I tucked it under the black rubber cover over my gauges and I can access it any time
Thread
Thread Starter
Forum
Replies
Last Post