Kawasaki Mule Discuss the multi purpose Mule within.

2510 wont start after rebuild

Thread Tools
 
Search this Thread
 
  #1  
Old 10-26-2007 | 01:48 PM
jackpot5283's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2007
Posts: 2
Default 2510 wont start after rebuild

i bought a 2510 with a bad trans for 100 bucks. i sold the motor to some people it ran fine for awhile but we eventually concluded it was pretty wore out i rebuilt it and lined up the marks on the camshaft crankshaft and flywheel. now when i crank it wont start it tries but it also pukes fuel out of the carbuerator pleases help asap. im going to try new plugs today and maybe put my other set of coils on it
 
  #2  
Old 12-30-2007 | 10:46 AM
whitehendrix's Avatar
Senior Member
1st Gear Member
Joined: Dec 2007
Posts: 2,092
From: terrorizing southeastern norf carolina
Default RE: 2510 wont start after rebuild

timings probably 180 out, boss.
was it at tdc on thecompression or exhaust?


...sounds like it was set at tdc on the exhaust stroke if its blowin fuel out of the carb.
 
  #3  
Old 12-30-2007 | 07:20 PM
jackpot5283's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2007
Posts: 2
Default RE: 2510 wont start after rebuild

yeah that is my guess too i have disassembled the motor and reassembled it and aligned the timing mark on the cam sprocket and the mark on the crank gear and put it back together is there something im missing i cant find any literature on this and the
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hallz031
General Tech
0
06-29-2011 04:11 PM
hallz031
Kawasaki Jet Ski's
0
06-29-2011 04:03 PM
fbryant1
Kawasaki Mule
0
03-05-2011 03:05 AM
mzs6
Ninja 500R
6
04-15-2008 10:22 AM
Toddy
Ninja ZX-6R & ZX-6RR
20
04-19-2006 01:01 AM




All times are GMT. The time now is 10:40 AM.