2018 4010 Trans Idle Problem
#1
2018 4010 Trans Idle Problem
Hi All,
I have a 2018 4010 Trans SE. Bought it brand new, it now has 74 hours on it.
It has run like a champ up until about 2 weeks ago. I notice that the idle was loping, and it wasn't idling as steady as it used to. I pulled the top plate off the throttle body and adjusted the idle. It ran great for about 2 days, then would suffer low idle again. The last 2 days, I've had to pull the hose going to the throttle body and shoot some carb cleaner up there just to get it to start. It would still idle slow, until it warmed up it would get a little better.
Today, it won't even start.
I've read up on the idle issue some have but am not sure which way to go with this. I'm about 100 miles from my nearest dealer and if this is something I could solve in the garage that would be awesome.
Any help or direction would be appreciated.
Thanks,
Jay
I have a 2018 4010 Trans SE. Bought it brand new, it now has 74 hours on it.
It has run like a champ up until about 2 weeks ago. I notice that the idle was loping, and it wasn't idling as steady as it used to. I pulled the top plate off the throttle body and adjusted the idle. It ran great for about 2 days, then would suffer low idle again. The last 2 days, I've had to pull the hose going to the throttle body and shoot some carb cleaner up there just to get it to start. It would still idle slow, until it warmed up it would get a little better.
Today, it won't even start.
I've read up on the idle issue some have but am not sure which way to go with this. I'm about 100 miles from my nearest dealer and if this is something I could solve in the garage that would be awesome.
Any help or direction would be appreciated.
Thanks,
Jay
Thread
Thread Starter
Forum
Replies
Last Post