General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Start?

Reply Subscribe

Search this Thread

#1

Old

08-09-2013 | 08:11 PM

papodog

Thread Starter

|

Junior Member

Joined: Aug 2013

Posts: 5

Default

Start?

I just bought this bike BN125. when key is in place and once turned on, when clutch is release it turns off. Is this because is over flooded or what? It use to start perfect but now it will not kick over.

Reply

#2

Old

08-10-2013 | 10:19 AM

Dragone#19

Administrator

Joined: Nov 2005

Posts: 18,288

From: The Silver State

1st Gear Member

Default

Sounds like your kickstand safety switch is sticking, bad or may even need adjusted. If that option is available anyway. You can test it with your meter or jumper it for testing.

Welcome to KF

Reply

#3

Old

08-14-2013 | 10:30 PM

deej

Your Humble Moderator/Admin

Joined: Nov 2005

Posts: 21,060

From: Washington

1st Gear Member

Default

Welcome to the forums. It sounds like what was described above. if there is a kickstand switch, pull the two wires and connect them together.

Reply

Reply Subscribe

Related Topics

Thread

Thread Starter

Forum

Replies

Last Post

2007 KLX250s will not start cold, but will bump start or start from a jump just fine

DirtyHustle

KLX 250S

11

03-23-2014 02:34 PM

hard start or no start

cegusman

KLX 250S

14

09-25-2012 02:08 PM

Klx wont start/hard to start!!! Sos

IQOUTLAW

KLX 250S

19

03-23-2010 02:33 PM

Strange clutch problem -No start - start / die

horizonod

KLX 250S

11

01-16-2009 12:11 PM

Reply Share

First
Prev
1 / 1
Next
Last

All times are GMT. The time now is 05:26 AM.