General Motorcycle Discussion Have some questions or information about riding that is not tech? Here you go!

Low side! Talk about breaking in a used bike . . . Info Revised.

Thread Tools
 
Search this Thread
 
  #1  
Old 10-24-2007 | 01:46 AM
Dago's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2007
Posts: 16
Default Low side! Talk about breaking in a used bike . . . Info Revised.


Slid about 40 feet. I had myCL-15 Crypthelmet locked down on the side, so the only damage to the bike was on the front left of the upper fairing (broke off a good piece of the turn signal cover), the side/centerstand, and the engine cover. The footpeg plate actually snapped in two, I adhesived it back together so I could easily shift from neutral to first and back again while I'm making a small effort to fix it back up. I'moffering it as a parts bike in the for sale section if anyone wants to buy it, make an offer above 800 and the bike is yours. I actually just figured out I wouldn't be able to store it after mid December anyway andI don't feel like renting a garage for it at a storage facility.

I didn't have a scratch (or any discomfort at all really), but I can slide pretty well. My denim jeans are destroyed at the knee. My Icon leg armor issomewhat scratched on the knees and top of the shins, but I still feel comfortable wearing these 65 dollar pieces in the future and feel they're still good for a 70 mph slide, that's a real testament to them. A couple of scratches surfaced on my Joe Rocket Meteor boots' side latches. One little blemish formed on the forearm of my Joe Rocket Reactor Jacket. My Joe Rocket Pheonix gloves aren't even scratched. I slid face down on my knee pads and helmet's (RF1000) chin piece (full face really does have a purpose) since I didn't have any butt protection and didn't want to ruin my jacket or my *** (along with the other pieces which would be damaged in all likelihood anyway).

Both my HJC CL-15 Crypt and my Shoei RF-1000 Helmet are toast. I just bought the Shoei helmet today. Am I dissapointed? Nah, the laydown taughtme a lot more about the bike's limits than regular riding ever will.I'm sure I'll need to explore those limits at some time or another to get myself out of serious trouble. Hopefully I'll be able to make enough money someday to make up for the remaining cost of this bike and the personal equipment I damaged.

The slide was on an asphalt road, somewhat older and filled with pebbles.

Stay Safe, any requests for pictures?

Zack

P.S. Asking 900 for the bike. For Sale Post here https://www.kawasakiforums.com/m_210.../tm.htm#210413

Engine fired up with first try and no choke; The scraped engine cover is leaking oil out of the bike when the motor is on, a new gasket should fix it, but a cover may be needed also

Transmission shifts, but the engine dies as soon as the clutch is let into its friction zone while the tranny is in gear (Anyone know what could be causing this?)

Good Side



Bad Side

All lights still work!





I didn't notice before, but the centerstand now rubs against the drive chain.



These were below denim jeans, I trashed the jeans.

















All I have with me is a camera phone, sorry.
 
  #2  
Old 10-24-2007 | 05:05 AM
ninjan00b's Avatar
Member
1st Gear Member
Joined: Aug 2007
Posts: 63
From: Lincoln, NE
Default RE: Low side! Talk about breaking in a used bike . . .

yeah dood show us some pics. bike and helmets
 
  #3  
Old 10-24-2007 | 05:45 AM
Dragone#19's Avatar
Administrator
Joined: Nov 2005
Posts: 18,288
From: The Silver State
1st Gear Member
Default RE: Low side! Talk about breaking in a used bike . . .

lol on the pics. Glad that you are whole. bummer on the low side.
 
  #4  
Old 10-24-2007 | 11:40 AM
jeffzx9's Avatar
Super Moderator
1st Gear Member
Joined: May 2007
Posts: 3,350
From: Clarksville, OH
Default RE: Low side! Talk about breaking in a used bike . . .

Sorry to hear about the "off." ^+1 on the Glad you're OK, and that your gear did its job.
 
  #5  
Old 10-24-2007 | 03:51 PM
toad1025's Avatar
Senior Member
Joined: Apr 2005
Posts: 1,629
From:
Default RE: Low side! Talk about breaking in a used bike . . .

Glad you came thru unscathed! I gotta see pics tho!
 
  #6  
Old 10-24-2007 | 04:11 PM
hoedogg's Avatar
Administrator
1st Gear Member
Joined: Feb 2006
Posts: 17,484
From: bay area cali
Default RE: Low side! Talk about breaking in a used bike . . .

glad ur ok bro.
 
  #7  
Old 10-24-2007 | 08:00 PM
zzrick's Avatar
Senior Member
1st Gear Member
Joined: Jun 2007
Posts: 8,820
From: Liberty Twnshp, OH
Default RE: Low side! Talk about breaking in a used bike . . .

Bummer....glad you are unscathed though
 
  #8  
Old 10-24-2007 | 08:41 PM
toad1025's Avatar
Senior Member
Joined: Apr 2005
Posts: 1,629
From:
Default RE: Low side! Talk about breaking in a used bike . . .

Hey ZZ, stop using my words
 
  #9  
Old 10-24-2007 | 10:59 PM
yoman1's Avatar
Senior Member
1st Gear Member
Joined: Sep 2007
Posts: 434
From: Delaware
Default RE: Low side! Talk about breaking in a used bike . . .

Glad your ok,
looks like your gear was well worth it.
 
  #10  
Old 10-25-2007 | 02:39 AM
zzrick's Avatar
Senior Member
1st Gear Member
Joined: Jun 2007
Posts: 8,820
From: Liberty Twnshp, OH
Default RE: Low side! Talk about breaking in a used bike . . .

ORIGINAL: toad1025

Hey ZZ, stop using my words
lol, I wonderd why that word was in my head...because I had just read it maybe?
 


Quick Reply: Low side! Talk about breaking in a used bike . . . Info Revised.



All times are GMT. The time now is 06:41 AM.